Axis T93F20

IP66, NEMA 4X, RJ45 -40 °C/ °F with IEEE 802.3af
AXIS T93F20 Outdoor Housing can power the camera and its heater and has a temperature range from -40 °C to 60 °C (-40 °F to 140 °F) for the housing itself. The temperature range in running operation depends on the camera model. For more information please check the datasheet.

The housing is very power efficient and only requires 15 W PoE at a cold start in -40 ºC/ºF. AXIS T93F05 Protective Housing is a pure protective enclosure and does not have any electronics inside. Therefore, the lower temperature specification is 0 ºC.

Features to protect what you value
AXIS T93F Housing Series has IP66 and NEMA 4X protection rating against the ingress of dust, windblown dust, rain, high pressure water jets from any direction, hose-directed water, and damage from external ice formation. IK10-rated for protection against impact and vandal acts.
In addition, the cables are vandal protected and it is prepared to accommodate an optional alarm switch that triggers at vandal attempts.

Corridor format
As optional accessory, AXIS Corridor Format Bracket A can be purchased if the fixed camera needs to be installed in a Corridor Format, but keeping the housing straight. The Corridor Format installation is particularly suitable for surveillance of narrow alleys or perimeters.

Ease of installation
AXIS T93F Series is out-of-the-box ready for installation outdoors. AXIS T94Q01A Wall Mount is included. For installations involving protective pipes, AXIS T94R01P Conduit Back Box (optional accessory) should be used. Threaded holes underneath the housing simplify installation of Axis Illuminators.