Design
Housing material |
Metal |
LED indicators |
Y |
Internal |
N |
Networking
Auto MDI/MDI-X |
Y |
Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
Ethernet interface type |
Gigabit Ethernet |
Networking standards |
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z |
Converter input interface |
1000Base-T, 100Base-TX, 10Base-T |
Converter output interface |
1000Base-LX |
Power
Input voltage |
100-240 V |
Input frequency |
50/60 Hz |
Input current |
0.5/0.25 A |
Operational conditions
Operating relative humidity (H-H) |
5 - 95% |
Storage temperature (T-T) |
-25 - 70 °C |
Weight & dimensions
Depth |
143 mm |
Width |
42 mm |
Weight |
60 g |
Height |
227 mm |
Ports & interfaces
Fiber ports quantity |
1 |
DC-in jack |
Y |
Performance
Maximum transfer distance |
15000 m |
Certificates
Certification |
FCC Class B\nUL/cUL, CE, CB |
Additionally
Transfer rate (Mbps) |
1000 Mbit/s |
Wireless technologies |
Wired |
Ethernet LAN (RJ-45) ports quantity |
4 |
Operating temperature range (T-T) |
0 - 50 °C |
10/100/1000 Mbps Managed Multi-port Optical Demarcation Device
- 802.1Q VLAN-tags on per-port basis, based on DiffServ or PRI values
- SNMP Manageable
- QoS - 802.1p-based packet prioritization
- Per-port bi-directional Bandwidth control
- VLAN-tagging and Q-in-Q (double-tagging) segregates customer traffic
- Up and running in less then five minutes
The Giga-AccessEtherLinX-II enables service providers to offer differentiated “Transparent LAN” services to multi-tenant building and business customers without the need for costly remote routers. Residing at the customer premises, the Giga-AccessEtherLinX-II provides a VLAN-based, Layer 2 entry point to the last mile fiber network to support trunking, differentiating and separating customer traffic. Featuring SNMP management with per-port 802.1Q VLAN, 802.1p QoS, traffic prioritization, bandwidth control and multicast pruning/snooping (using IGMP v1, v2), the Giga-AccessEtherLinX-II is perfect for a wide range of Fiber-to-the-Home, Fiber-to-the-Curb and Fiber-to-the-Business (FTTx) services, and is an ideal solution for delivering Ethernet-based services to customers quickly and cost effectively. Designed with a small footprint, the Giga-AccessEtherLinXII facilitates easy installation inside the premises. It features four 10/100/1000 twisted pair Ethernet downlink ports (for connecting users/LANs), with either a 1000Base-FX fiber or SFP uplink port, and is powered from an internal AC or DC power supply.
The Giga-AccessEtherLinX-II accepts traffic containing VLAN tags on the Uplink port and directs that traffic to the twisted pair downlink ports based on the VLAN ID. In addition to assigning 802.1Q VLAN-tags on a per-port basis, users can also “Qualify” the different VLAN TAGS to assign based on the DiffServ or PRI value of the incoming frame. Traffic priority for each port is supported with a hi/low prioritization queues. The Giga-AccessEtherLinX-II includes per port bi-directional bandwidth control, and supports IGMP multicast pruning which ensures only the necessary amount of IP multicast packets are bridged.