Networking
| Broadcast storm control |
Y |
| Auto MDI/MDI-X |
Y |
| Networking standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| 10G support |
N |
| Full duplex |
Y |
Design
| Housing material |
Acrylonitrile butadiene styrene (ABS) |
| DIN rail mounting |
Y |
| LED indicators |
Link, Power, Speed |
| International Protection (IP) code |
IP30 |
| Certification |
UL 60950-1, CAN/CSA-C22.2 No.60950, U.S.A.: FCC Part 15 CISPR 2, EU: EN55011, EN55022 Class A, EN61000-3-2/3, EN55024, IEC61000-4-2/3/4/5/6/8/11 |
| Wall mountable |
Y |
Power
| Power consumption (typical) |
2.4 W |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
5 |
| Basic switching RJ-45 Ethernet ports type |
Fast Ethernet (10/100) |
| Copper ethernet cabling technology |
100BASE-TX, 10BASE-T |
Operational conditions
| Operating relative humidity (H-H) |
20 - 95% |
| Storage temperature (T-T) |
-50 - 95 °C |
| Storage relative humidity (H-H) |
0 - 95% |
Performance
| Mean time between failures (MTBF) |
1580000 h |
| Auto-negotiation |
Y |
Weight & dimensions
| Depth |
102 mm |
| Width |
70 mm |
| Height |
27 mm |
Additionally
| Transfer rate (Mbps) |
100 Mbit/s |
| Colour of product |
Blue |
| Operating temperature range (T-T) |
-40 - 85 °C |
Fast Ethernet, 5xRJ-45, LED, 10-30V, 2.4W, 70x102x27mm, IP30, 158000h MTBF, Blue
Introduction
ADAM-6520 is a 5-port industrial-grade switch with Ethernet connectivity and from 10 to 100 Mbps transfer rates. (Auto-negotiation). Just like any other product in the ADAM family, ADAM-6520 can be mounted in three different ways: DIN rail, panel and piggyback. Solid industrial-grade design assures reliable operation in common application areas like: semi conductor factories, inventory control environments, assembly lines, manufacturing and many more. All modules support a wide voltage range of +10 ~ 30 VDC over the terminal block, and 3,000 VDC surge protection ensures that over-voltage is no concern. The wide operating temperature of ADAM-6520 goes from -10 ~ 70°, while ADAM-6520I from -40 ~ 85°. This permits them to be functional in harsh environments. The six inclusive LED indicators make troubleshooting of the modules easier. Each port has a pair of LEDs that indicate link status and port activities. This easily informs users of any collisions, the link status, power failure and data receipts for immediate on-site diagnosis.
