Networking
| Cabling technology |
10/100Base-T(X) |
| Networking standards |
IEEE 802.3, IEEE 802.3u |
Design
| Housing material |
Aluminium |
| Mounting type |
Wall |
| LED indicators |
Y |
| RoHS compliance |
Y |
Performance
| Duplex system |
Full, Half |
| Auto MDIX IEEE |
Y |
| Ethernet LAN data rates |
10, 100 Mbit/s |
| Full duplex |
Y |
| Mean time between failures (MTBF) |
265154 h |
| Cable types supported |
Cat3, Cat4, Cat5 |
| International Protection (IP) code |
IP30 |
| Maximum transfer distance |
2600 m |
| Auto-negotiation |
Y |
| Type |
Network transmitter |
| Data transfer rate |
85 Mbit/s |
Operational conditions
| Operating relative humidity (H-H) |
5 - 95% |
| Storage temperature (T-T) |
-40 - 85 °C |
Weight & dimensions
| Depth |
110 mm |
| Weight |
800 g |
| Width |
50 mm |
| Height |
135 mm |
Power
| Power consumption (max) |
7.2 W |
| AC input voltage |
12-48 V |
Additionally
| Colour of product |
Blue |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Operating temperature range (T-T) |
-40 - 75 °C |
10/100Mbps, 1xRJ-45, 12-48V, IP30, Aluminium, 50x110x135mm, 800g, Blue
EXTEND YOUR ETHERNET INFRASTRUCTURE USING EXISTING COPPER WIRE OR COAXIAL CABLE
Elinx Extenders extend your Ethernet connections up to 8,530 ft. (2,600 m) via coaxial cable or up to 6,200 ft. (1,900 m) over a pair of unused straight copper wire. Our newest model, the EIR2-EXTEND-A features an M12 Ethernet connector option to help decrease unplanned downtime. The M12 connector option offers a quick, secure connection with increased reliability.
Functional Description
The EIR-EXTEND-C is a point-to-point Ethernet Extender designed to operate in harsh environments making use of existing coaxial cable. Ethernet connections can be made up 8,530 feet using existing coaxial cable. The Ethernet Extender fully complies with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX standards. The EIR-EXTEND-C functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). The perfect solution for legacy surveillance infrastructure upgrades moving from analog to IP-based, as no new cable is needed - saving time, money and labor cost. Installation is easy with a single switch setting; one end is set for local and the other remote. The EIR-EXTEND-C is used in pairs, one at each end of your existing coaxial cable.
