Networking
| Cabling technology |
10/100Base-T(X) |
| Networking standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Performance
| Auto MDIX IEEE |
Y |
| Full duplex |
Y |
| Mean time between failures (MTBF) |
57.515 h |
| Cable types supported |
Cat5 |
| Maximum transfer distance |
100 m |
Power
| Power consumption (typical) |
5.76 W |
| External power adapter |
Y |
| AC input voltage |
12 V |
Other features
| Operating temperature (T-T) |
14 - 140 °F |
Operational conditions
| Operating relative humidity (H-H) |
5 - 95% |
| Storage temperature (T-T) |
-20 - 70 °C |
Weight & dimensions
| Depth |
109.2 mm |
| Weight |
150 g |
| Width |
803 mm |
| Height |
238 mm |
Design
| LED indicators |
Y |
| RoHS compliance |
Y |
Additionally
| Colour of product |
Blue |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Operating temperature range (T-T) |
-10 - 60 °C |
ethernet coaxial extender, 10/100 Base-T, 10/100Mbps, RJ-45, BNC Coaxial
The model EIS-EXTEND-C allows your existing coaxial cable to be used to extend Ethernet connections up to 8530 feet (2,600 M).
Two EIS-EXTEND-C models are required for the Ethernet extension, (one at each end of your extension points). This product can be used with included power supply or in a 19 inch rack mount chassis, which can house up to 16 EIS-EXTEND-C units or EIS Media Converters.
One 10/100Base TX (TX) Ethernet port with RJ-45 connector
- Auto negotiation of speed and duplex mode on TX port
- Auto MDI/MDIX on Ethernet port
- IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX compliant
- Line port uses BNC connector or F-Type connector
- Line port link is full-duplex up to 85Mbps over existing coaxial cable
- One DIP switch for configuring local or remote mode
- Status LED’s for monitoring and connection status
- External AC to DC power adapter included
- Used as a stand-alone device or with a 19 inch rack chassis
- Hot-swappable when used in 19 inch rack chassis
