Data transmission
| MAC address table |
8000 entries |
| Store-and-forward |
Y |
Design
| Housing material |
Metal |
| LED indicators |
Link, Power, Speed, Status, System |
| International Protection (IP) code |
IP30 |
| Certification |
CE, FCC, RoHS |
Networking
| Auto MDI/MDI-X |
Y |
| Networking standards |
IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, IEEE 802.3 |
| Flow control support |
Y |
| 10G support |
N |
| Full duplex |
Y |
Power
| Input voltage |
18 - 36 V |
| Power consumption (typical) |
20 W |
Operational conditions
| Operating relative humidity (H-H) |
0 - 95% |
| Storage temperature (T-T) |
-40 - 80 °C |
Ports & interfaces
| Terminal block port |
Y |
| Basic switching RJ-45 Ethernet ports quantity |
26 |
| Basic switching RJ-45 Ethernet ports type |
Fast Ethernet (10/100) |
| Copper ethernet cabling technology |
100BASE-TX, 100BASE-T, 10BASE-T |
Performance
| Packet buffer memory |
0.256 MB |
| Mean time between failures (MTBF) |
200000 h |
Weight & dimensions
| Depth |
220 mm |
| Width |
443 mm |
| Height |
44 mm |
Power over Ethernet (PoE)
| Power protection features |
Reverse polarity |
Additionally
| Operating temperature range (T-T) |
-10 - 60 °C |
Fast Ethernet, 26xRj-45, 256Kb Packet Buffer Memory, 8K MAC, 10/100BASE-T(X), 18-36V, 20W IP30, Metal, 443x44x220mm, 1U Rack, Blue
INDUSTRIAL GRADE, UNMANAGED ETHERNET SWITCHES - WITH GIGABIT OPTIONS
ESW600 Series Industrial Grade, 26 Port, Unmanaged, 10/100 Ethernet switches - with Gigabit options
B&B Electronics’ industrial hardened rack mount Ethernet switches are designed with harsh, rugged environment applications in mind. They are the ideal communications solutions for traffic control, water management, and warehousing.
Functional Description
B&B Electronics Elinx ESW626 family of unmanaged Industrial rackmount Ethernet switches have been designed to meet light Industrial communication requirements. This family offers several configuration options ranging from 26 ports all RJ45 copper to RJ45 copper with multi mode, single mode, and or combo SFP gigabit ports.
Fiber Options
Choose fiber optic ports for long distance runs or applications that require extreme noise immunity. Both multimode and single-mode fiber options are available. The factory installed fiber ports support 100BaseFX speeds. Some models support an optional combo SFP slot which can be used for applications requiring gigabit speeds over fiber networks.
Gigabit
Gigabit ports are typically used for backhaul connectivity or with IP cameras. Models with gigabit options are designed with combo ports. A combo port consists of both: a copper 10/100/1000 port and a gigabit SFP port. The gigabit SFP modules are optional items. If fiber optic connections with gigabit speeds are required, choose the appropriate SFP module. Shown below, and add it to your order. Note that the gigabit combo ports will default to the copper connection, once an SFP module is installed the copper gigabit port will be disabled and the switch will utilize the SFP port for traffic.
