Technical details
| RX sensitivity |
-32 dB |
| Output interface |
Fiber (SC) |
| Baud rate |
115.2 Kbit/s |
| Isolation |
2 kV |
| Transmission distance (multi-mode) |
2 km |
| RS-485 signals |
Data+, Data- |
| Host interface |
RS-232/422/485 |
| Mounting |
DIN-rail |
| RS-232 signals |
GND |
| Wavelength |
1310 nm |
Operational conditions
| Operating relative humidity (H-H) |
0 - 95% |
| Storage temperature (T-T) |
-40 - 85 °C |
Weight & dimensions
| Depth |
92.9 mm |
| Weight |
208.65 g |
| Width |
132.4 mm |
| Height |
30 mm |
Certificates
| Certification |
FCC, CE, IEC 61850-3, IEEE 1613, UL C1 D2, NEMA TS2 |
Additionally
| Colour of product |
Blue |
| Operating temperature range (T-T) |
-40 - 85 °C |
RS 232/422/485 to SC, 1310nm, 10-48V, 115.2Kbit/s, 132.4x92.9x30mm, 208.65g, Blue
FOSTCDRI-PH-MC
The FOSTCDRI-PH-xx series are premium heavy industrial serial to fiber optic converters. Designed for rugged industrial environments, they have been put through most exacting compliance testing in the industry. Meeting IEC 61850-3 and IEEE 1613 requirements, they are suitable for installation in electrical substations. These specifications are more stringent than NEMA TS1/TS2 requirements for transportation applications. Powerful isolation protects equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection. Packaged in a rugged IP30 metal case, these units convert serial signals to multi-mode or single-mode fiber optic. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch. In addition to direct point-to-point connectivity, operation in multi-drop mode is possible enableing serial devices to communicate with up to 31 others in a fiber ring. Supporting mixed standards, you can replace other converters and add EMI/RFI protection inherent to fiber optic communications.
