Networking
Auto MDI/MDI-X |
Y |
Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
Ethernet interface type |
Fast Ethernet, Gigabit Ethernet |
Networking standards |
IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u, IEEE 802.3z |
Converter input interface |
1000Base-T |
Converter output interface |
1000Base-SX |
Power
Input voltage |
100-240 V |
Total Power over Ethernet (PoE) budget |
25.5 W |
Output voltage |
52 V |
Power over Ethernet (PoE) |
Y |
External power adapter |
Y |
Input frequency |
50/60 Hz |
Input current |
2.0 A |
Output current |
2.31 A |
Ports & interfaces
Power over Ethernet plus (PoE+) ports quantity |
2 |
DC-in jack |
Y |
Performance
Fiber cable diameters supported |
50/125, 62.5/125 µm |
Fiber mode structure |
Multi-mode |
Maximum transfer distance |
550 m |
Wavelength |
850 nm |
Operational conditions
Operating relative humidity (H-H) |
-40 - 85% |
Storage temperature (T-T) |
5 - 95 °C |
Storage relative humidity (H-H) |
5 - 95% |
Design
Internal |
N |
LED indicators |
Y |
Weight & dimensions
Depth |
97.028 mm |
Width |
92.58 mm |
Height |
20.32 mm |
Certificates
RoHS compliance |
Y |
Certification |
FCC A, UL/cUL, CSA, CE |
Additionally
Colour of product |
Black |
Transfer rate (Mbps) |
1000 Mbit/s |
Wireless technologies |
Wired |
Ethernet LAN (RJ-45) ports quantity |
2 |
Operating temperature range (T-T) |
0 - 70 °C |
PoE+ Giga-MiniMc LFPT, 2TX/SX-MM850-SC
The PoE and PoE+ Giga-MiniMc LFPT is targeted for Gigabit and 100 Mbps applications that require power over Ethernet to locations where PoE is needed to power the unit.
The PoE and PoE+Giga-MiniMc LFPT are low-cost, compact, multi-port media converters that support both PoE and PoE+ standards. Utilizing their flexibility and compact size, interior private network applications can further benefit from the ever-expanding versatility of the MiniMc product line.
Featuring 2 10/100/1000Base-T copper UTP ports and one SFP uplink port that supports either a copper or fiber SFP, the PoE and PoE+ Giga-MiniMc LFPT are Power Source Equipment (PSE) devices. The PoE+ GigaMiniMc LFPT is capable of powering up to two Powered Devices (PD) over standard CAT5
cable or better, whereas the PoE GigaMiniMc LFPT can power one PD device via a copper port while delivering data over the other copper port. The PoE+ GigaMiniMc is able to power high-power devices such as touch panels, PTZ (pan-tilt-zoom) IP surveillance cameras, and RFID readers that require more
power than the typical 15.4 W provided by standard PSE devices such as the PoE GigaMiniMc LFPT.
The PoE and PoE+ Giga-MiniMc LFPT models are fully compatible with the IEEE 802.3af/at standards to ensure a seamless intergation into your network. Enhanced features include store-and-forward, Autocross and PoE reset on fiber loss of signal. PoE reset is an advanced function that, when enabled, will force the PSE output power to reset when LINK state is lost on the SFP port.