Data transmission
MAC address table |
8 entries |
Switching capacity |
3.2 Gbit/s |
Jumbo frames |
2048 |
Ports & interfaces
Relay outputs |
1 |
Basic switching RJ-45 Ethernet ports quantity |
16 |
Terminal block port |
Y |
Basic switching RJ-45 Ethernet ports type |
Fast Ethernet (10/100) |
Copper ethernet cabling technology |
100BASE-TX, 100BASE-T, 10BASE-T |
Design
Housing material |
Metal |
DIN rail mounting |
Y |
International Protection (IP) code |
IP30 |
Certification |
UL Class 1 Division 2 Groups A/B/C/D; ATEX Zone 2, IECEx, UL508, FCC Part 15 Subpart B Class A, EN 55011/55022, Class A, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
Wall mountable |
Y |
Networking
Auto MDI/MDI-X |
Y |
Networking standards |
IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
Flow control support |
Y |
Full duplex |
Y |
DHCP client |
Y |
10G support |
N |
Power
Input voltage |
12 - 48 V |
Power consumption (typical) |
3.84 W |
Performance
Packet buffer memory |
0.128 MB |
Mean time between failures (MTBF) |
4653552 h |
Security
Loop protection |
Y |
Security algorithms |
SNMP |
Operational conditions
Operating relative humidity (H-H) |
10 - 95% |
Storage temperature (T-T) |
-40 - 85 °C |
Storage relative humidity (H-H) |
10 - 95% |
Weight & dimensions
Depth |
84 mm |
Width |
74 mm |
Height |
120 mm |
Management features
Web-based management |
Y |
Switch type |
Managed |
Power over Ethernet (PoE)
Power protection features |
Over current, Reverse polarity |
System requirements
Compatible operating systems |
32-bit/64-bit Windows XP/Vista/7, Windows Server 2003/2008/2008 R2 |
Additionally
Colour of product |
Blue |
Transfer rate (Mbps) |
100 Mbit/s |
Jumbo Frames support |
Y |
Operating temperature range (T-T) |
-40 - 75 °C |
Fast Ethernet, 100Mbps, 16xRJ-45, 8k MAC, 3.2Gbps, 2048 Jumbo Frames, 12-48V, 3.84W, 74x84x120mm, IP30, Metal, 4653552 MTBF
Introduction
SE300 series is the industry’s first design for Ethernet Green, IEEE802.3az - Energy Ethernet switches that cut power usage by up to 60%, significantly saving energy usage in the field and reducing total cost of ownership over 24/7. Advantech B+B SmartWorx SE300 series monitored switches can be used as plugand-play unmanaged switches right out of the box. Installing the iView² Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions. When enabled with iView2 , these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS (Networking Management Software) at the same time. This gives full access control to both control engineers and IT managers.
Basic Monitoring & Management Capabilities
iView2 gives network managers the ability to monitor and manage eWorx SE300 series switches from a central location. It features an intuitive Graphical User Interface (GUI) that provides a real-life representation of all installed eWorx SE300 Series switches, displaying device functions, port settings, device status information and traffic statistics via SNMP. iView2 can also configure eWorx SE300 series switches monitoring capabilities for automation applications via the popular Modbus TCP/IP protocol. Control engineers can use existing HMI/SCADA software to integrate the network status by creating extra tags for real-time monitoring. iView2is a standalone software that supports multiple platforms and operating systems.