Weight & dimensions
| Depth |
152 mm |
| Weight |
1300 g |
| Width |
74 mm |
| Height |
105 mm |
Data transmission
| MAC address table |
8000 entries |
| Switching capacity |
5.6 Gbit/s |
| Jumbo frames |
9210 |
| Number of VLANs |
256 |
| Number of queues |
8 |
Ports & interfaces
| Relay outputs |
1 |
| Console port |
RS-232 |
| Basic switching RJ-45 Ethernet ports quantity |
8 |
| Terminal block port |
Y |
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-TX, 10BASE-T |
| Basic switching RJ-45 Ethernet ports type |
Fast Ethernet (10/100) |
| Combo SFP ports quantity |
2 |
Performance
| Buffer size |
4100 KB |
| Packet buffer memory |
4.1 MB |
| Mean time between failures (MTBF) |
858835 h |
| Auto-negotiation |
Y |
Management features
| MIB support |
Standard MIB, Private MIB |
| Quality of Service (QoS) support |
Y |
| Reset button |
Y |
| Web-based management |
Y |
| Switch type |
Managed |
Networking
| Port mirroring |
Y |
| VLAN support |
Y |
| IGMP snooping |
Y |
| Auto MDI/MDI-X |
Y |
| Rate limiting |
Y |
| Link aggregation |
Y |
| Networking standards |
IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Port-based VLAN |
Y |
| Flow control support |
Y |
| Auto-sensing |
Y |
| 10G support |
N |
| Full duplex |
Y |
Design
| Housing material |
Metal |
| DIN rail mounting |
Y |
| LED indicators |
Y |
| International Protection (IP) code |
IP30 |
| Certification |
UL508, NEMA TS2, EN50121-4, FCC Part 15 Subpart B Class A, EN 55011/55022, Class A, EN 61000-4-2 (Level 3), EN 61000-4-3 (Level 3), EN 61000-4-4 (Level 3), EN 61000-4-5 (Level 3), EN 61000-4-6 (Level 3), EN 61000-4-8 (Level 3), IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
| Wall mountable |
Y |
Power
| Input voltage |
16.8 - 57.6 V |
| Power consumption (typical) |
12.1 W |
| Redundant power supply (RPS) support |
Y |
| Power consumption (max) |
132 W |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) power per port |
30 W |
| Total Power over Ethernet (PoE) budget |
120 W |
| Power over Ethernet plus (PoE+) ports quantity |
8 |
| Power protection features |
Over current, Reverse polarity |
| Power over Ethernet (PoE) |
Y |
Security
| SSH/SSL support |
Y |
| Security algorithms |
HTTPS, PEAP, SSH, SSL/TLS, TTLS |
Operational conditions
| Operating relative humidity (H-H) |
10 - 95% |
| Storage temperature (T-T) |
-40 - 85 °C |
| Storage relative humidity (H-H) |
10 - 95% |
Additionally
| Colour of product |
Blue |
| Jumbo Frames support |
Y |
| Operating temperature range (T-T) |
-40 - 75 °C |
Managed, MIB, 8xRJ-45, 2xSFP Combo, RS-232, 8000 MAC, 5.6Gbit/s, 256 VLANs, 8 Queues, 9216 Jumbo Frames, 12-48V, 12.1W, 74x152x105mm, 1.3kg, Blue
FULLY MANAGED WITH INDUSTRIAL, RUGGEDIZED FEATURES DESIGNED TO WORK IN HARSH ENVIRONMENTS
- Get all the features you are already looking for in a managed switch such as support for Telnet, IIpv4/IPv6, SNMP v1, V2c and v3, VLAN, IGMP snooping and more.
- Avoid paying for extra NMS software for multiple switch deployment through our embedded IXM software that can auto-synchronize firmware updates and push settings for single or groups of switches.
- Get a simple, easy-to-navigate web GUI for managing the full suite of diagnostic, monitoring and network performance capabilities
- Reduce your redundant network cabling and planning costs through self-healing X-Ring recovery technology that allows different ring healing methods to coexist in one switch
- Protect your investment against unforeseeable congestion and performance issues with our Gigabit bandwidth option
Get all the features you are already looking for in a managed switch
SE500 Series includes the features you are already looking for in a managed switch such as VLAN, IGMP Snooping, Network Redundancy, Link Aggregation, SNMP V1,V2c,V3, Web and Telnet support. Smart PoE Management features allow advanced PoE settings and monitoring. Also included are comprehensive network security features such as SSH, HTTPS/SSL, TLS, TTLS, PEAP and Radius are also offered.
Avoid paying for extra NMS software for multiple switch deployment
Embedded into each switch is the industry leading eWorx’s IXM(TM) cross management technology. IXM(TM) allows the installer to auto synchronize firmware updates and push configuration settings to either individual or groups of switches. IXM(TM), provides maintenance and provisioning functionality to both the SE500 and SE300 family switches without the need of extra software or trained personal. IXM(TM) speeds up switch deployment and ensures network stability.
Get a simple, easy-to-navigate web GUI
With all SE500 series switches, you’ll get a simple, easy-to-use web GUI to manage a powerful suite of diagnostic, monitoring and network performance capabilities, including but not limited to cable diagnostics, IPv4/IPv6 ping, Fiber SFP monitoring (DDMI), System log, port utilization, traffic statistics, QoS, rate limiting and more.
Reduce your redundant network cabling and planning costs through X-Ring technology
Our sub-20ms self-healing X-Ring rapid auto recovery technology allows different ring healing methods to coexist in one switch and supports different topology options, providing you a substantial improvement over Spanning Tree and Rapid Spanning Tree.
Protect your investment against unforeseeable congestion and performance issues
The SE500 series offers a full gigabit option, allowing speeds up to 10 times greater than the previous generation, resulting in less congestion and better overall performance for the entire network.
Get equipment certified to work in harsh environment applications
Our switches are made with dual wide-range power input design (84.V to 62.4 VDC), self-healing network resiliency (less than 10(ms) @ 250 units), wide temperature tolerance (-40 to 75°C), MTBF (Mean time between failures) over 50 years, High Electrical Magnetic (EMC) resistance, Level 4 design, *IEEE 1613 Class 2 Complaint*
Reduce total cost of ownership by cutting power usage by up to 60%
As Ethernet Green, IEEE802.3az Energy-Efficient Ethernet switches, SE500 series switches eWorx Switches cut power usage by up to 60%, reducing total cost of ownership.
