Data transmission
| MAC address table |
8000 entries |
| Switching capacity |
32 Gbit/s |
| Jumbo frames |
9126 |
Ports & interfaces
| Relay outputs |
1 |
| Basic switching RJ-45 Ethernet ports quantity |
16 |
| Terminal block port |
Y |
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-T, 1000BASE-TX, 100BASE-T, 10BASE-T |
Networking
| Broadcast storm control |
Y |
| Auto MDI/MDI-X |
Y |
| Full duplex |
Y |
| Networking standards |
IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Flow control support |
Y |
| DHCP client |
Y |
| 10G support |
N |
Design
| Housing material |
Metal |
| DIN rail mounting |
Y |
| LED indicators |
Y |
| International Protection (IP) code |
IP30 |
| Certification |
UL Class 1 Division 2 Groups A/B/C/D; ATEX Zone 2, IECEx, UL508, FCC Part 15 Subpart B Class A, EN 55011/55022, Class A, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
| Wall mountable |
Y |
Power
| Input voltage |
12 - 48 V |
| Power consumption (typical) |
8 W |
Weight & dimensions
| Width |
74 mm |
| Height |
120 mm |
| Depth |
84 mm |
Management features
| Web-based management |
Y |
| Quality of Service (QoS) support |
Y |
| Switch type |
Unmanaged |
Performance
| Packet buffer memory |
4.1 MB |
| Mean time between failures (MTBF) |
2788343 h |
Security
| Loop protection |
Y |
| Security algorithms |
SNMP |
Operational conditions
| Operating relative humidity (H-H) |
10 - 95% |
| Storage temperature (T-T) |
-40 - 85 °C |
| Storage relative humidity (H-H) |
10 - 95% |
Power over Ethernet (PoE)
| Power protection features |
Over current, Reverse polarity |
System requirements
| Compatible operating systems |
32-bit/64-bit Windows XP/Vista/7, Windows Server 2003/2008/2008 R2 |
Additionally
| Colour of product |
Blue |
| Transfer rate (Mbps) |
100 Mbit/s |
| Jumbo Frames support |
Y |
| Operating temperature range (T-T) |
-40 - 75 °C |
Gigabit Ethernet, 100m, 100Mbps, 16xRJ-45, 8k MAC, 32Gbps, 9126 Jumbo Frames, 12-48V, 8W, 74x84x120mm, IP30, Metal, 2788343h MTBF
Introduction
SE300 series is the industry’s first design for Ethernet Green, IEEE802.3az - Energy Ethernet switches that cut power usage by up to 60%, significantly saving energy usage in the field and reducing total cost of ownership over 24/7. Advantech B+B SmartWorx SE300 series monitored switches can be used as plugand-play unmanaged switches right out of the box. Installing the iView Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions. When enabled with iView2, these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS (Networking Management Software) at the same time. This gives full access control to both control engineers and IT managers.
Basic Monitoring & Management Capabilities
iView2 gives network managers the ability to monitor and manage eWorx SE300 series switches from a central location. It features an intuitive Graphical User Interface (GUI) that provides a real-life representation of all installed eWorx SE300 Series switches, displaying device functions, port settings, device status information and traffic statistics via SNMP. iView2 can also configure eWorx SE300 series switches monitoring capabilities for automation applications via the popular Modbus TCP/IP protocol. Control engineers can use existing HMI/SCADA software to integrate the network status by creating extra tags for real-time monitoring. iView2 is a standalone software that supports multiple platforms and operating systems.
