Data transmission
| MAC address table |
8000 entries |
| Switching capacity |
20 Gbit/s |
| Jumbo frames |
9216 |
| Number of VLANs |
256 |
| Number of queues |
8 |
Ports & interfaces
| Relay outputs |
1 |
| Basic switching RJ-45 Ethernet ports quantity |
8 |
| Fast Ethernet (copper) ports quantity |
8 |
| Terminal block port |
Y |
| Basic switching RJ-45 Ethernet ports type |
Fast Ethernet (10/100) |
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-TX, 10BASE-T |
| Gigabit Ethernet (copper) ports quantity |
2 |
| Combo SFP ports quantity |
2 |
Management features
| MIB support |
Standard MIB, Private MIB |
| Quality of Service (QoS) support |
Y |
| Web-based management |
Y |
| Switch type |
Managed |
Networking
| VLAN support |
Y |
| IGMP snooping |
Y |
| Rate limiting |
Y |
| Link aggregation |
Y |
| Networking standards |
IEEE 802.1Q, IEEE 802.1p, IEEE 802.3az |
| Flow control support |
Y |
| Auto-sensing |
Y |
| 10G support |
N |
| Full duplex |
Y |
Design
| Housing material |
Metal |
| DIN rail mounting |
Y |
| LED indicators |
Y |
| International Protection (IP) code |
IP30 |
| Certification |
UL508, NEMA TS2, EN50121-4, FCC Part 15 Subpart B Class A, EN 55011/55022, Class A, EN 61000-4-2 (Level 3), EN 61000-4-3 (Level 3), EN 61000-4-4 (Level 3), EN 61000-4-5 (Level 3),EN 61000-4-6 (Level 3), EN 61000-4-8 (Level 3), IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
| Wall mountable |
Y |
Power
| Input voltage |
8.4 - 57.6 V |
| Power consumption (typical) |
12.1 W |
| Redundant power supply (RPS) support |
Y |
Performance
| Packet buffer memory |
4.1 MB |
| Mean time between failures (MTBF) |
858835 h |
| Firmware upgradeable |
Y |
| Auto-negotiation |
Y |
Operational conditions
| Operating relative humidity (H-H) |
10 - 95% |
| Storage temperature (T-T) |
-40 - 85 °C |
| Storage relative humidity (H-H) |
10 - 95% |
Security
| Loop protection |
Y |
| Security algorithms |
802.1x RADIUS, HTTPS, PEAP, SNMPv3, SSH, SSL/TLS, TTLS |
Protocols
| Management protocols |
WebAccess NMS, LLDP, SNMP v1/v2c/v3, Traps, SMTP, RMON, SNTP |
Weight & dimensions
| Depth |
152 mm |
| Weight |
1300 g |
| Width |
74 mm |
| Height |
105 mm |
Power over Ethernet (PoE)
| Power protection features |
Over current, Reverse polarity |
Additionally
| Colour of product |
Blue |
| Jumbo Frames support |
Y |
| Operating temperature range (T-T) |
-40 - 75 °C |
Managed, 8xRJ-45, 2xCpmbo SFP, 8000 MAC, 20 Gbit/s, 9216 Jumbo Frames, 8.4 - 57.6V, 12.1W, 74x152x105mm, 1.3kg, Blue
Fully Managed Industrial Ethernet Switch All Gigabit, SNMP, Modbus/TCP
The SE500 series is a fully managed Ethernet switch with industrial, ruggedized features designed to work in harsh environment applications. This switch offers all the features expected in a managed switch such as VLAN, IGMP Snooping, Network Redundancy, Link Aggregation, SNMP V1,V2c,V3, Web and Telnet support. Comprehensive network security features such as SSH, HTTPS/SSL, TLS, TTLS, PEAP and Radius are also offered. Comprehensive network security features such as SSH, HTTPS/SSL, TLS, TTLS, PEAP and Radius are also offered. Embedded into each switch is the industry leading eWorx IXM™ cross management technology. IXM allows the installer to auto-synchronize firmware updates and push configuration settings to either individual or groups of switches. IXM provides maintenance and provisioning functionality to both the SE500 and SE300 family switches without the need of extra software or trained personal. IXM speeds up switch deployment and ensures network stability. The eWorx SE500 series switches feature a powerful suite of diagnostic, monitoring and network performance capabilities: Cable diagnostics, IPv4/ IPv6 ping, fiber SFP monitoring (DDMI), port utilization, traffic statistics, QoS and rate limiting - all available from the Web GUI. These advanced features offer quick and easy troubleshooting.
