Networking
| Networking standards |
IEEE 802.3af, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Flow control support |
Y |
Data transmission
| MAC address table |
8000 entries |
| Switching capacity |
20 Gbit/s |
Ports & interfaces
| Relay outputs |
1 |
| Basic switching RJ-45 Ethernet ports quantity |
10 |
| Terminal block port |
Y |
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-TX, 10BASE-T |
Design
| Housing material |
Aluminium, Metal |
| DIN rail mounting |
Y |
| International Protection (IP) code |
IP30 |
| Certification |
UL Class 1 Division 2 Groups A,B,C,D; ATEX Zone 2 (pending); IECEx (pending), CE, FCC, e-Mark, EN 55011/ 55022 Class A, EN 61000-6-4, FCC Part 15 Subpart B Class A,EN 55024/ EN 61000-6-2, EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8 (Magnetic Field) Level 3, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
Power
| Input voltage |
9 - 36 V |
| Power consumption (typical) |
65 W |
| Redundant power supply (RPS) support |
Y |
Power over Ethernet (PoE)
| Total Power over Ethernet (PoE) budget |
60 W |
| Power over Ethernet plus (PoE+) ports quantity |
8 |
| Power protection features |
Over current, Reverse polarity |
| Power over Ethernet (PoE) |
Y |
Performance
| Packet buffer memory |
4100 MB |
| Mean time between failures (MTBF) |
2788343 h |
| Plug and Play |
Y |
Operational conditions
| Operating relative humidity (H-H) |
10 - 95% |
| Storage temperature (T-T) |
-40 - 85 °C |
| Storage relative humidity (H-H) |
10 - 95% |
Protocols
| Management protocols |
iView2 , LLDP, SNMP v1/v2c, Modbus/TCP |
Weight & dimensions
| Depth |
152 mm |
| Width |
74 mm |
| Height |
105 mm |
Packaging data
| Mounting brackets included |
Y |
| Wall mounting kit |
Y |
| Quick start guide |
Y |
Additionally
| Colour of product |
Blue |
| Operating temperature range (T-T) |
-40 - 75 °C |
Monitored, 10xRJ45, 8xPoE+, 8000 MAC, 20Gbit/s, 9-36V, 65W, 74x152x105mm, Metal/Aluminium, IP30, Blue
BRIDGING THE GAP BETWEEN MANAGED AND UNMANAGED SWITCHES
- Built-in Modbus & SNMP features which offer the ability to remotely monitor and analyze network status
- Lite Management for small scale/edge networks needing remote data collection, diagnostics, real time data acquisition.
- IEEE802.3az - Energy Efficient Ethernet
- Operates in a wide temperature range (-40° to 75°)
- Designed for hazardous locations: UL C1D2, ATEX Zone 2 (pending), IECEx (pending)
- iView2 Management Software gives network managers the ability to monitor and manage eWorx SE300 series switches from a central location.
DETAILS
SE300 series is the industry’s first design for Ethernet Green®, IEEE802.3az - Energy Ethernet switches that cut power usage by up to 60%, significantly saving energy usage in the field and reducing total cost of ownership over 24/7.
Advantech B+B SmartWorx SE300 series monitored switches can be used as plug-and-play unmanaged switches right out of the box. Installing the iView² Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions.
When enabled with iView2, these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS (Networking Management Software) at the same time. This gives full access control to both control engineers and IT managers.
