Data transmission
| MAC address table |
8000 entries |
| Switching capacity |
20 Gbit/s |
| Jumbo frames |
9216 |
| Number of VLANs |
256 |
| Number of queues |
8 |
Ports & interfaces
| Relay outputs |
1 |
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity |
8 |
| Combo SFP ports quantity |
2 |
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-TX, 10BASE-T |
Management features
| MIB support |
Standard MIB, Private MIB |
| Web-based management |
Y |
| Switch type |
Managed |
| Quality of Service (QoS) support |
Y |
| Reset button |
Y |
Networking
| Broadcast storm control |
Y |
| VLAN support |
Y |
| IGMP snooping |
Y |
| Auto MDI/MDI-X |
Y |
| Rate limiting |
Y |
| Link aggregation |
Y |
| Networking standards |
IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Full duplex |
Y |
| Cable types supported |
Cat5e, Cat6 |
| 10G support |
N |
Design
| Certification |
UL508, NEMA TS2, EN50121-4, EMI FCC Part 15 Subpart B Class A, EN 55011/55022, Class A, EN 61000-4-2 (Level 3), EN 61000-4-3 (Level 3), EN 61000-4-4 (Level 3), EN 61000-4-5 (Level 3), EN 61000-4-6 (Level 3), EN 61000-4-8 (Level 3), IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
| Wall mountable |
Y |
| Housing material |
Metal |
| DIN rail mounting |
Y |
| LED indicators |
Y |
| International Protection (IP) code |
IP30 |
Weight & dimensions
| Weight |
1300 g |
| Width |
74 mm |
| Height |
105 mm |
| Depth |
152 mm |
Power over Ethernet (PoE)
| Power protection features |
Over current, Reverse polarity |
| Power over Ethernet (PoE) power per port |
30 W |
| Total Power over Ethernet (PoE) budget |
120 W |
| Power over Ethernet (PoE) |
Y |
Power
| Input voltage |
16.8 - 57.6 V |
| Power consumption (typical) |
132 W |
Optical fiber
| Fiber ethernet cabling technology |
100BASE-LX, 100BASE-ZX, 1000BASE-LHX, 1000BASE-SX |
Performance
| Packet buffer memory |
4.1 MB |
| Mean time between failures (MTBF) |
858835 h |
| Firmware upgradeable |
Y |
| Built-in processor |
Y |
| Auto-negotiation |
Y |
Security
| Security algorithms |
802.1x RADIUS, HTTPS, PEAP, SNMPv3, SSH |
Operational conditions
| Operating relative humidity (H-H) |
10 - 95% |
| Storage temperature (T-T) |
-40 - 85 °C |
| Storage relative humidity (H-H) |
10 - 95% |
Protocols
| Management protocols |
WebAccess NMS, LLDP, SNMP v1/v2c/v3, Traps, SMTP, RMON, SNTP, |
Additionally
| Jumbo Frames support |
Y |
| Operating temperature range (T-T) |
-40 - 75 °C |
| Colour of product |
Blue |
Managed, 8xRJ-45, 2xCombo SFP, 8000 MAC, 20Gbit/s, 9216 Jumbo Frames, POE, 30W/port, 74x152x105mm, 1.3kg, Blue
Fully Managed Industrial Ethernet Switch All Gigabit, PoE+, SNMP Modbus/TCP
The SEGP500 series is a fully managed PoE+ Gigabit Ethernet switch with industrial, ruggedized features designed to work in harsh environment applications. This switch offers all the features expected in a managed switch such as VLAN, IGMP Snooping, Network Redundancy, Link Aggregation, SNMP V1,V2c,V3, Web and Telnet support. Smart PoE Management features allow advanced PoE settings and monitoring. Comprehensive network security features such as SSH, HTTPS/SSL, TLS, TTLS, PEAP and Radius are also offered. The SEGP500 series support Power over Ethernet, simplifying deployments with PTZ cameras, wireless access points (APs), and other standards-compliant powered devices. The products comply with the 802.3af/at PoE+ standards, supporting up to 30W on each PoE port, not to exceed the switches' specific power budget. Using the management interface, an administrator can control various PoE functions, such as remotely rebooting cameras or access points, from anywhere on the network, including over the Internet. The SEGP500 series features a powerful suite of diagnostic, monitoring, network performance capabilities and industry leading eWorx IXM™ cross management technology: Cable diagnostics, IPv4/IPv6 PING, fiber SFP monitoring (DDMI), port utilization, traffic statistics, QoS and rate limiting - all available from the Web GUI. The unique management feature, IXM™, allows the installer to auto synchronize firmware updates and push configuration settings to either individual or groups of switches.
