Power
| Input frequency |
50/60 Hz |
| Input voltage |
110-240 V |
Ports & interfaces
| DC-in jack |
Y |
| Fiber ports quantity |
1 |
Performance
| Fiber mode structure |
Multi-mode |
Additionally
| Transfer rate (Mbps) |
100 Mbit/s |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
100BASE-TX to Duplex 100BASE-FX, Multimode, ST, RJ-45
<b>Quick Facts</b>
- Seamless copper-to-fiber conversion for Ethernet or Fast Ethernet.
- Easy plug-and-play operation.
- Reconfigures itself for proper UTP cabling—no more crossover cables!
- Support for half- and full-duplex operation.
- Guaranteed for life!
<b>Further Details</b>
- Uplink/downlink fault detection is provided by LinkAlert™.
- Autosensing port configuration.
- Full- and half-duplex operation.
- Universal, autosensing power supply.
- Also available in 6-port, single-mode, SC, and 10BASE-T to 10BASE-FL models.
Connect Fast Ethernet segments to fiber segments without using crossover cables. With a Black Box® AutoCross Media Converter, you no longer have to deal with mismatched transmit and receive cable pairs.
This converter contains a switch that senses the type of circuit connected to the UTP port and automatically configures the port to match. Because the UTP side is autosensing to MDI/MDI-X, you can use either a straight or crossed cable to connect a switch or NIC.
The converter features LinkAlert™, which monitors 100% of physical uplink and downlink failures and alerts the network if transmission fails.
Use the AutoCross Media Converter up to 100 meters (328 ft.) on the UTP link and up to 2 kilometers (1.2 mi.) on a multimode fiber link.
