Networking
| Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
| Compliance industry standards |
cUL/UL |
Power
| AC adapter input voltage |
90 - 264 V |
| AC adapter frequency |
47/63 Hz |
| Power over Ethernet (PoE) voltage |
57 V |
Operational conditions
| Operating temperature (T-T) |
-4 - 122 °F |
802.3at PoE Gigabit Injector, 1-Port
- A single-port, midspan injector that's 802.3at compatible for devices requiring higher wattage.
- Provides 33.6 W of safe Power over Ethernet (PoE) Plus power and it supports Gigabit data speeds.
- UNH-IOL test lab certified for interoperability with other PoE equipment.
<b>Further Details</b>
- An economical wiring solution. Carries both data and power over a single Ethernet cable.
- Powers 802.3at compliant devices, which require more power than that provided by standard PoE.
- Ideal for multiradio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs.
- Enables you to avoid installing AC power at a remote camera, access point, or thin client. Move equipment from room to room without costly, time-consuming rewiring.
- Supports 10-/100-/1000-Mbps midspan data connections on an RJ-45 input/output.
- Provides overvoltage/overcurrent overload protection as well as short circuit protection on the power output (per 802.3at specifications).
- Diagnostic LEDs indicate 802.3at device detection and alert you to faults.
- Backward compatible with 802.3af standard equipment.
- Performs "two-finger" classification sequence, determining if the connected device requires 802.3at-level power.
- Also supports connections to Cisco® legacy equipment, including Cisco AP1250 Series access points running in full power mode.
- Simple plug-and-play installation.
- Compact, weighs less than half a pound, and can be easily wallmounted.
- RoHS compliant.
