Ports & interfaces
| RJ-45 output ports |
1 |
| Number of HDMI outputs |
1 |
Technical details
| Maximum transfer distance |
100 m |
| Number of connectors |
2 |
| Type |
AV receiver |
Additionally
| Ethernet LAN connection |
Y |
Full HD, WUXGA, HDMI F, Interconnect/LAN, 100–240 VAC, 50–60 Hz
This attractively priced IP streaming solution multicasts HDMI® video and audio to a nearly unlimited number of screens on a network. You need just one transmitter and one receiver for each screen.
MediaCento IPX PoE Multicast is ideal for distributing digital signage content or other HD video and audio across an Ethernet network. Because the transmitter and receivers install directly into your existing LAN infrastructure, integration is easy. There's no need to run expensive dedicated links from a back room to digital signage in lobbies.
The extender transmits up to 328 feet (100 m) per link, but goes even longer when additional network switches are added to the mix. You can even use fiber with media converters to go several miles if needed. Its signal is completely digital from end to end, so your digital content is never compromised.
Lossless compression for HD extension.
MediaCento IPX PoE Multicast features IGMP support and packetizes signals so all your HD source content can be delivered anywhere you want over Ethernet wiring.
It works in point-to-point or point-to-multipoint configurations. Just plug in as many receivers as you need at your remote screens. From one transmitter, you can have 16 different multicast groups to multiple receivers in multicast mode.
Featuring visually lossless compression, the MediaCento IPX PoE Multicast units transmit broadcast-quality video and audio, and support Full 1080p resolution no matter what the distance or the number of screens, as well as all common PC resolutions (XGA, SXGA, UXGA, WSXGA) up to 1920 x 1200 at 60 Hz.
Extremely easy to set up and use.
MediaCento IPX PoE Multicast also supports RS-232 for configuration and control, and for extending bidirectional control signals. Use this serial link to switch screens on or off.
There's no need to configure any IP settings (although more experienced users can do if needed). Simply use rotary switches to set the transmitter and receivers to the same multicast channel and all IP multicasting settings are automatically configured; then just connect your source, your display(s), and a network switch. It's ready to go!
PoE powered
The MediaCento IPX PoE series can be powered using standard PoE network technology. Using a PoE network switch completely eliminates the need for external power supplies making the installation even easier.
