Video
Analog signal format system |
PAL |
PAL resolutions |
752 x 582 pixels |
Image sensor
Optical sensor size |
1/2 " |
Sensor type |
CCD |
Performance
Day/night mode |
Y |
PTZ control (Pan/Tilt/Zoom) |
N |
Type |
CCTV security camera |
Camera
Camera shutter speed |
1/50000 - 1/50 s |
Minimum illumination |
0.00391 lx |
Power
Power over Ethernet (PoE) |
N |
Power consumption |
70 mA |
Storage
Card reader integrated |
N |
Built-in hard drive |
N |
Audio
Signal-to-Noise Ratio (SNR) |
50 dB |
Built-in microphone |
Y |
Additionally
Ethernet LAN connection |
N |
Wireless technologies |
Wired |
1/2" CCD, PAL (752 x 582 px), Day/Night, 50 dB, 230V AC, 450 g
- Advanced Image Processing Technology
- Improved XF-Dynamic engine with SmartBLC
- Detail enhancement
- True Day/Night performance with switchable filter
- 1/2-inch CCD sensor
The LTC 0630 Dinion2X Day/Night camera is a highperformance, surveillance camera. It uses a 1/2-inch CCD sensor and incorporates advanced digital signal processing for outstanding picture performance.
The advanced image processing enhances sensitivity; the improved XF-Dynamic engine extends the dynamic
range. This unique combination provides a sharper, more detailed image with outstanding accuracy in color reproduction even under harsh lighting conditions.
The Dinion2X camera is easy to install and ready to use, and offers the best solution for demanding scene
conditions. The day/night feature ensures the highest image quality possible at any time. Depending on the
available light the camera will automatically switch from color to monochrome.
All Dinion cameras are supplied ready to operate. Simply attach the lens, connect video and then power. Six distinct pre-programmed operational modes are stored in the camera. Recall the mode that suits your application for optimized performance.
The camera automatically detects the lens type. The lens wizard ensures accurate back-focusing for perfectly sharp pictures at all times. For especially challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and an On-screen Display (OSD).