Night vision
Night vision distance |
15 m |
Number of illumination LEDs |
15 |
Night vision |
Y |
LED type |
IR |
Infra-red wavelength |
850 nm |
Storage
Built-in hard drive |
N |
Maximum memory card size |
2000 GB |
Card reader integrated |
Y |
Camera
Camera shutter type |
Electronic |
Pan range |
0 - 350 ° |
Tilt angle |
0 - 130 ° |
Video
Image quality adjustment |
Saturation, Contrast, Brightness |
Frame rate |
30 fps |
Noise reduction |
Y |
Privacy masking |
Y |
Flip & mirror |
Y |
Security
IP address filtering |
Y |
Video motion detection |
Y |
HTTPS encryption |
Y |
Active tampering alarm |
Y |
Privacy protection |
Y |
Image sensor
Progressive scan |
Y |
Sensor type |
CMOS |
Effective sensor resolution |
1952 pixels |
Audio
Signal-to-Noise Ratio (SNR) |
50 dB |
Audio system full duplex |
Y |
Networking
Supported network protocols |
IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA, NTP, SNMP, 802.1x, DNS, DNSv6, DDNS, SMTP, iSCSI, UPnP, DiffServ, LLDP, SOAP, Dropbox, CHAP |
Power
Power over Ethernet (PoE) |
Y |
DC-in jack |
Y |
Performance
Day/night mode |
Y |
Wide Dynamic Range (WDR) |
Y |
Alarm input/output |
Y |
Type |
IP |
Packaging content
Number of cameras |
1 |
User guide |
Y |
Additionally
Ethernet LAN (RJ-45) ports quantity |
1 |
Ethernet LAN connection |
Y |
Wireless technologies |
Wired |
Rotation |
350 ° |
1280x720, H.264, M- JPEG, 120 ms - 340 ms, IR 15m, 50dB, 10/100 Base-T, Hhalf/Full Duplex, microSDHC/XC, White, 1050g
<b>Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements</b>
The camera uses Intelligent Dynamic Noise Reduction which actively analyzes the contents of a scene and
reduces noise artifacts accordingly. The low-noise image and the efficient H.264 compression technology provide clear images while reducing bandwidth and storage by up to 50% compared to other H.264 cameras. This results in reduced-bandwidth streams that still retain a high image quality and smooth motion. The camera provides the most usable image possible by cleverly optimizing the detail-to-bandwidth ratio.
<b>Area-based encoding</b>
Area-based encoding is another feature which reduces bandwidth. Compression parameters for up to eight
user-definable regions can be set. This allows uninteresting regions to be highly compressed, leaving more bandwidth for important parts of the scene.
<b>Multiple streams</b>
The innovative multi-streaming feature delivers various H.264 streams together with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and recording as well as integration with third-party video management systems.
<b>Regions of interest and E-PTZ</b>
Regions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls
allow you to select specific areas of the parent image. These regions produce separate streams for remote
viewing and recording. These streams, together with the main stream, allow the operator to separately
monitor the most interesting part of a scene while still retaining situational awareness.
<b>Two-way audio and audio alarm</b>
Two-way audio allows the operator to communicate with visitors or intruders via an external audio line
input and output. Audio detection can be used to generate an alarm if needed.
<b>Tamper and motion detection</b>
A wide range of configuration options is available for alarms signaling camera tampering. A built-in algorithm for detecting movement in the video can also be used for alarm signaling.
<b>Edge recording</b>
The MicroSD card slot supports up to 2 TB of storage capacity. A microSD card can be used for local alarm
recording. Pre-alarm recording in RAM reduces recording bandwidth on the network, or — if microSD
card recording is used — extends the effective life of the storage medium.
<b>Cloud-based services</b>
The camera supports time-based or alarm-based JPEG posting to four different accounts. These accounts can address FTP servers or cloud-based storage facilities (for example, Dropbox). Video clips or JPEG images can also be exported to these accounts.
Alarms can be set up to trigger an e-mail or SMS notification so you are always aware of abnormal
events.
<b>Easy installation</b>
Power for the camera can be supplied via a Powerover-Ethernet compliant network cable connection.
With this configuration, only a single cable connection is required to view, power, and control the camera.
Using PoE makes installation easier and more costeffective, as cameras do not require a local power source.
The camera can also be supplied with power from +12 VDC power supplies. To increase system reliability, the camera can be simultaneously connected to both PoE and +12 VDC supplies.
Additionally, uninterruptible power supplies (UPS) can be used to ensure continuous operation, even during a power failure.
For trouble-free network cabling, the camera supports Auto-MDIX which allows the use of straight or crossover cables.
<b>True day/night switching</b>
The camera incorporates mechanical filter technology for vivid daytime color and exceptional night-time
imaging while maintaining sharp focus under all lighting conditions.
<b>Access security</b>
Password protection with three levels and 802.1x authentication is supported. To secure Web browser
access, use HTTPS with a SSL certificate stored in the camera. The video and audio communication channels can be independently AES encrypted with 128-bit keys by installing the optional encryption site license.
<b>Complete viewing software</b>
There are many ways to access the camera’s features: using a web browser, with the Bosch Video
Management System, with the free-of-charge Bosch Video Client, with the video security mobile
app, or via third-party software.
<b>Video security App</b>
The Bosch video security mobile App has been developed to enable Anywhere access to HD surveillance images allowing you to view live images from any location. The App is designed to give you complete control of all your cameras, from panning and tilting to zoom and focus functions. It’s like taking your control room with you. This App, together with the separately available Bosch transcoder, will allow you to fully utilize our dynamic transcoding features so you can play back images even over low-bandwidth connections.
<b>System integration</b>
The camera conforms to the ONVIF Profile S specification. Compliance with this standard guarantees interoperability between network video products regardless of manufacturer. Third-party integrators can easily access the internal feature set of the camera for integration into large projects. Visit the Bosch Integration Partner Program (IPP) website (ipp.boschsecurity.com) for more information.