Performance
| Wavelength |
850 nm |
| Link budget |
13 dB |
| Sensitivity |
-17 dBmW |
| Tx power (min) |
-10 dBmW |
| Maximum transfer distance |
550 m |
| Tx power (max) |
-4 dBmW |
Networking
| Auto MDI/MDI-X |
Y |
| Duplex system |
Half, Full |
Additionally
| Transfer rate (Mbps) |
1000 Mbit/s |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
CCM-1056 - UTP / MM, -10 dBm - -4 dBm Tx PWR, -17.0 dBm Rx Sensitivity, LC, 850 ηm, 550 m
<b>Gigabit Ethernet UTP-to-Fiber: 1000BASE-T to 1000BASE-SX/LX/ZX</b>
Canary’s CCM-10XX Gigabit Ethernet Media Converters combine existing 100 meter Category-5(E) UTP and Fiber optic segments to deliver Gigabit data across the network. They are ideal for data intensive backbones in the enterprise or on campus, and can be used to take advantage of low-cost Gigabit capable switches. Canary’s Gigabit UTP-to-Fiber Media Converters are used to economically distribute Gigabit Ethernet capacity to user desktops throughout the network as bandwidth demand increases.
Standard CCM-1055 multi-mode Media Converters guarantee minimum transmission distances of 220+ meters over 62.5/125 μm fiber or 500/550+ meters (depending on bandwidth) over 50.0/125 μm fiber. Standard CCM-1031 single-mode models provide transmission distances ranging from 10 to 70 kilometers over 9.0 μm single-mode fiber.
- 1000BASE-T Autonegotiation for Full-duplex and Halfduplex operation with Flow-Control and;
- Switch selectable, Fiber-Port Autonegotiation for common, end-to-end link awareness and Flow-Control, or for independent connection to Gigabit fiber ports on older switches
- Internal Auto-sensing, MDI / MDI-X crossover switch for Network Interface Card or Switch connections
- Transparent to Flow-Control commands such as PAUSE
- A full array of status / diagnostic LEDs
- Additional models include: Single-Fiber Bi-Directional single-mode and versions launching ITU-specified CWDM transmitter wavelengths
