Ports & interfaces
Fiber ports quantity |
1 |
DC-in jack |
Y |
Power
Input voltage |
100-240 V |
Input frequency |
50/60 Hz |
External power adapter |
Y |
Performance
Tx power (min) |
-15 dBmW |
Maximum transfer distance |
2000 m |
Fiber mode structure |
Single-mode |
Tx power (max) |
-8 dBmW |
Wavelength |
1310 nm |
Link budget |
26 dB |
Sensitivity |
-34 dBmW |
Other features
MAC address table |
2000 entries |
Additionally
Wireless technologies |
Wired |
Transfer rate (Mbps) |
100 Mbit/s |
Ethernet LAN (RJ-45) ports quantity |
4 |
CMX-4012S - -15.0 - -8.0 dBm Tx PWR, -34.0 dBm Rx Sensitivity, 26.0 dB Budget, ST, 1310 ηm, 30 Km
The CMX-4011/4012 series of Managed Multi-media Switches was especially developed for linking groups of remote users and as a work-group switch for small and medium sized business. They are ideal for home-office networks and, in conjunction with MDU (Multiple Dwelling Unit) equipment, provide economical home access to centrally or metro-supplied Ethernet services. Available with a variety of multi-media interfaces to provide 10/100BASE fiber and copper connections means that fiber cabling can be directly supplied to the home giving the user great speed and bandwidth for his personal local area network.
SNMP Management ready, the CMX-4011/4012 family enables network managers to remotely monitor networked connections quickly and easily via the RJ-45 and Fiber, (in-band) or RS-232 (out-of-band) ports that are linked to the 'master' management application. Using single-mode or Extended Reach single-mode connectors, they can extend enterprise LAN management and configuration to a range of 60 km. The CMX-4011/4012 family is designed to be 'plug-an-go.
Management and Fault Detection Capability - Full SNMP and Web Management, Loopback Test, Link Fault Signaling, among other features, makes the CMX-4011/4012 family of media switches a powerful addition to networks that require managed devices coupled with hassle-free deployments. CMX-4011/4012 media switches take advantage of lower-cost, multi-mode and single-mode, fiber installations to deliver well Managed Ethernet/Fast Ethernet across the network.
Cabling Flexibility – Compatible with multi-mode, single-mode, and long-haul single-mode fiber optic cabling, the CMX-4011/4012 family is capable of supporting networking distances of up to 60 km and meet standard IEEE 802.3 (Ethernet) and 802.3u (Fast Ethernet) protocols.
Link Fault Signaling - The LFS LED will immediately become lit to indicate when a cable has been severed or some other cause of disruption in service has occurred.
Simplified Troubleshooting - SNMP management and diagnostic LEDs minimize lost time spent by network administrators detecting and location the source of network problems formerly done by the visual inspection of cabling and equipment.
Easy Implementation - Integrated MDI/MDI-X auto-crossover and 10/100 auto-negotiation capabilities make the CMX-4011/4012 series simple to deploy within a network. Additionally, the CMX-4011/4012 series slim housings are ideal for installation in locations with limited space.
- Canary SNMP management application software (HP Open View Ó and IBM/Tivoli NetView Ó capable)
- Console Port and Telnet with both CLI (Command Line Interface) and Menu driven user interfaces
- Supports in-band, out-of-band and Web-based management
- Menu-driven, Web browser user interface
- TFTP firmware upgradeable
- VLAN Tag per port
- Supports 2K MAC address entries
- Store and forward switching technology
- IEEE 802.3x flow control under full-duplex
- Back-pressure flow control under half-duplex
- 1MB RAM (frame) buffer with non-blocking architecture
- Loopback Test (LBK) for instant connectivity confirmation
- Automatic MDI/MDI-X selection and 10/100 auto-negotiation on the RJ-45 ports
- LED status indicators for: power (PWR), link (LNK), activity (ACT), collision (COL), full-duplex (FD)
- Link Fault Signaling (LFS) forwards 'lost link state', to the next station, in order to force a Spanning Tree response
- SC, ST, connectors for multi-mode / single-mode fiber; Bi-directional, Single-Fiber connectors available
- Auto-sensing 100 - 240 VAC power supply
- Low power consumption design
- FCC Class A and CE approved