Performance
Sensitivity |
-23 dBmW |
Tx power (min) |
-3 dBmW |
Maximum transfer distance |
40000 m |
Fiber mode structure |
Single-mode |
Tx power (max) |
2 dBmW |
Wavelength |
1550 nm |
Link budget |
25 dB |
Networking
Auto MDI/MDI-X |
Y |
Duplex system |
Half, Full |
Ports & interfaces
Fiber ports quantity |
1 |
DC-in jack |
Y |
Power
Input voltage |
100-240 V |
Input frequency |
50/60 Hz |
External power adapter |
Y |
Additionally
Ethernet LAN (RJ-45) ports quantity |
1 |
Wireless technologies |
Wired |
Transfer rate (Mbps) |
1000 Mbit/s |
GFT-1037E4A - UTP / SM, -3.0 - 2.0 dBm Tx PWR, -23.0 dBm Rx Sensitivity, 25.0 dB Budget, SC, 1550/1310ηm, 40 Km
Canary’s Gigabit, Single-Fiber Bi-Directional Single-mode converters deliver long-range Gigabit data access over single fiber strand, single mode segments. G F T 10 37 A / B converters are designed to free-up fiber capacity by using dual wavelengths over a single strand of a duplex fiber pair. They are ideal for data intensive backbones in the enterprise or across the campus where extra fiber capacity is lacking but redundancy or additional access is needed to add channels or alternate protocols.
Canary’s Single-Fiber, Bi-Directional converters are functionally identical to standard units with the exception that units designated with an A (GFT-1037A) transmit at 1550 ηm and receive on 1310 ηm, while B units (GFT-1037B) transmit at 1310 ηm and receive on 1550 ηm. Single-Fiber converters must be connected as complementary A & B pairs. (A and B units must be ordered in pairs because every A unit must be connected to a B unit.) Similarly, standalone A & B units can be connected to complementary A & B modules used in the CCN-2000/0400 or CCM-1600 Chassis families. Canary Gigabit Single-Fiber converters are available with 20 or 40 kilometer transmission ranges.
- 1000BASE-T Autonegotiation for Full-duplex and Half- duplex operation with Flow-Control and;
- Switch selectable, Fiber-Port Autonegotiation for common, end-to-end Flow-Control, and link awareness, or for blind connection to Gigabit fiber ports on older switches
- Internal Auto-sensing, MDI / MDI-X crossover switch for Network Interface Card or Switch connections
- Uses Single-Fiber, single-mode connectors operating on 1550 ηm and 1310 ηm wavelengths
- Dual power jacks for connecting optional, redundant power supply
- Optional: UK, Continental European power
- Auto-sensing 100/240 VAC power supply
- Transparent to Flow-Control commands such as PAUSE
- A full array of status / diagnostic LEDs