Power
| Input frequency |
50/60 Hz |
| External power adapter |
Y |
| Input voltage |
100-240 V |
Performance
| Wavelength |
850 nm |
| Link budget |
19.2 dB |
| Sensitivity |
-34.4 dBmW |
| Tx power (min) |
-15.2 dBmW |
| Maximum transfer distance |
2000 m |
| Fiber mode structure |
Multi-mode |
| Tx power (max) |
-15.2 dBmW |
Networking
| Auto MDI/MDI-X |
Y |
| Duplex system |
Half, Full |
Ports & interfaces
| Fiber ports quantity |
1 |
| DC-in jack |
Y |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
| Transfer rate (Mbps) |
10 Mbit/s |
MCC-2022 - UTP / MM, -15.2 Tx PWR, -34.4 dBm Rx Sensitivity, 19.2 dB Budget, ST, 850ηm, 185m/ 2 Km
Canary MCC-20XX standalone converters are longtime standards for 10Mbs media conversion. They provide flexible combinations of BNC/UTP, BNC/Fiber, and UTP/Fiber Conversion with multi-mode or single mode connections. IEEE 802.3 compliant, they support 10BASE-T, 10BASE-2, and 10BASE-FL (FOIRL) links. Versions with BNC ports have internal, switch selectable 50 Ohm terminators. Power is supplied by an external auto-sensing wall-mount supply. All MCC-20XX 10 Mbs media converters are available as modular cards for Canary’s standard sixteen-slot, CCM-1600 converter chassis.
These long established products will continue to be supported as long as their core silicon components remain available in the marketplace.
MCC-2000, BNC-to-UTP converters specially modified for one-way transmission еhrough the copper (RJ-45) port, are available for security applications.
- Converters are Compliant with IEEE 802.3, 10 Mbs Ethernet standards
- MCC-2022 Copper-to-Fiber versions are transparent to Full and Half-duplex traffic
- Link Fault Signaling (LFS) is an option on MCC-2022 Copper-to-Fiber versions (special order)
- Full array of status / diagnostic LEDs
- Models with BNC connectors have a switch for internal 50 Ohm Termination
- Models with Fiber connectors are compatible with 10BASE-FL (FOIRL)
- Models with UTP connectors have Auto-polarity protection
- MCC-2000 BNC / UTP versions available with one-way transmission through RJ-45 port for security applications
