Ports & interfaces
Number of slots |
2 |
Ports quantity |
10 |
Serial ports quantity |
1 |
PS/2 ports quantity |
2 |
VGA (D-Sub) ports quantity |
1 |
Memory
Memory slots |
4 |
Memory clock speed |
667 MHz |
ECC |
Y |
Internal memory |
2 GB |
Internal memory type |
DDR2-SDRAM |
Maximum internal memory |
8 GB |
Storage
Hard drive capacity |
160 GB |
Hot-swap |
N |
Internal drive bays |
2 |
Drive device, transfer rate |
150 MB/s |
Hard drive size |
2.5 " |
Hard drive interface |
Serial ATA |
Total storage capacity |
160 GB |
Number of hard drives installed |
1 |
Processor special features
Intel Enhanced Halt State |
N |
Intel Hyper-Threading Technology |
N |
Intel® Anti-Theft Technology (Intel® AT) |
N |
Intel Virtualization Technology for Directed I/O (VT-d) |
N |
Intel Dual Display Capable Technology |
N |
Intel Clear Video Technology |
N |
Intel 64 |
Y |
Intel® Insider™ |
N |
Intel® Quick Sync Video Technology |
N |
Processor ARK ID |
27129 |
Intel Trusted Execution Technology |
N |
Intel Flex Memory Access |
N |
Intel Fast Memory Access |
N |
Intel Rapid Storage Technology |
N |
Intel® Turbo Boost Technology |
N |
Intel® Clear Video HD Technology (Intel® CVT HD) |
N |
Intel® Wireless Display (Intel® WiDi) |
N |
Intel Demand Based Switching |
N |
Enhanced Intel SpeedStep Technology |
N |
Intel FDI Technology |
N |
Intel VT-x with Extended Page Tables (EPT) |
N |
Intel vPro Technology |
N |
Intel Clear Video Technology for MID |
N |
Intel® My WiFi Technology (Intel® MWT) |
N |
Processor
Processor operating modes |
64-bit |
Embedded options available |
Y |
FSB Parity |
N |
Number of Processing Die Transistors |
188 M |
Processor front side bus |
533 MHz |
Conflict Free processor |
N |
Processor cache type |
L2 |
Processor codename |
Cedarmill |
Physical Address Extension (PAE) |
32 bit |
Thermal Monitoring Technologies |
N |
Execute Disable Bit |
Y |
Processor core voltage (AC) |
1.25 – 1.325 V |
Processor cache |
0.512 MB |
Number of processors installed |
1 |
Processor cores |
1 |
Thermal Design Power (TDP) |
86 W |
CPU multiplier (bus/core ratio) |
24 |
Processor lithography |
65 nm |
Processor package size |
37.5 mm |
Bus type |
FSB |
ECC supported by processor |
N |
Tcase |
69.2 °C |
Processor frequency |
3.2 GHz |
Performance
Noise level |
6.3 dB |
Performance management |
HP iLO |
Other features
Hard disk average seek time |
9 ms |
Supported data transfer rates |
10/100/1000 Mbit/s |
Power
Power supply type |
AC |
Power supply |
420 W |
Power supply input frequency |
47/63 Hz |
Operational conditions
Operating temperature (T-T) |
50 - 95 °F |
Networking
Networking features |
Gigabit Ethernet |
Certificates
Compliance industry standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, ACPI 2.0, PCI 3.0, PXE, WOL, USB 2.0 |
Additionally
Processing die size |
81 mm² |
InTru™ 3D Technology |
N |
Intel AES New Instructions |
N |
Ethernet LAN connection |
Y |
Ethernet LAN (RJ-45) ports quantity |
2 |
MCS 7816-H3, Intel Celeron D 352, 160GB SATA 2.5", CUCM 7.0
The Cisco MCS 7816-H3 Unified Communications Manager Appliance is an integral part of a complete entry-level architecture for a new generation of high-quality unified communications solutions that operate on enterprise data networks. This powerful platform is easy to deploy and highly cost-effective, and it delivers the high performance and availability that today's enterprise networks demand. The server appliance is preinstalled with an operating system and the Cisco Unified Communications Manager application. Cisco Unified Communications Manager is fully operational upon startup, requiring entry of just a few configuration variables such as IP address and domain.