Performance
Thermal Design Power (TDP) |
100 W |
Noise level (high speed) |
27 dB |
Rotational speed (min) |
1400 RPM |
Rotational speed (max) |
2500 RPM |
Type |
Cooler |
Suitable for |
Processor |
Fan diameter |
100 mm |
Supported processor sockets |
LGA 1150 (Socket H3) |
Number of heat pipes |
2 |
Heat pipes diameter |
6 mm |
100 W, 1400 - 2500 rpm, 300 g
Under the label „Cooltek - powered by Thermolab“ we present high-quality CPU-coolers for silent enthusiasts.
The ITX30 is a full copper cooler which is ideal for ultra-compact HTPC systems. With an overall height of just 30 mm including fan (!) the cooler fits in almost every case. The ITX30 was specifically designed and optimized for low running fans, which guarantees the cooler a superior cooling performance while being extremely silent, despite its compact dimensions.
In the base of the cooler two high-end heat pipes (6 mm diameter) are embedded. The copper heatpipes dissipate the waste heat of the processor very quickly to the cooling fins. The innovative design and the optimized fin spacing allow for an efficient heat exchange. In addition, surrounding motherboard components are cooled by the downward air flow.
The silent and extremely flat PWM fan has the dimensions 80 x 80 x 10 mm. By using the motherboard control function, the fan speed is automatically adjusted in accordance with the thermal conditions (1,400 to a maximum of 2,500 rpm). In the interests of minimal noise emissions as well as a very long life expectancy, a special EBR bearing in conjunction with optimized rotor blades are being used. This results in a particularly silent operation of the fan.
The combination of a very silent running fan and the outstanding cooling capacity of a full-copper heatsink ensure that the ITX30 is the perfect HTPC cooler, which can work unobtrusively in a living room environment.
The cooler comes with installation material for Intel LGA 1155/1156/1150 processors and is approved to 100 watt TDP. The installation is particularly simple, the cooler is securely screwed to the motherboard, a backplate is not necessary.