Ports & interfaces
| Component video (YPbPr/YCbCr) out |
4 |
| Composite video in |
1 |
| S-Video outputs quantity |
1 |
| Composite video out |
1 |
Additionally
| On/Off switch |
Y |
| RS-232 port |
1 |
| S-Video in |
1 |
Digital Video Switcher
The SE-800 digital switchers come standard with analog inputs. The SE-800DV model includes DV inputs and output plus an SDI overlay for use with a character generator that uses a down stream keyer (such as our CG-100). Additionally all SE-800s include an internal audio mixer with both mic and line level audio inputs. All SE-800s have voice sync to slew the voice relative to the image adjusting from "Audio Advanced" to "Audio Delayed". This works in all formats, including DV. All SE-800's include built-in format converters so each source may be seen with a composite video monitor.
SE-800s are supported with a family of accessories including monitor holders, shipping cases and mobile studios as well as compatible products, such as intercoms, character generators, and more.
* 4 inputs in DV, composite, component, and S-Video.
* Program outputs in SDI, DV, composite, component and S-Video.
* SDI overlay for graphics or character generators.
* Monitor outputs: one composite output for each input via included composite video format converters.
* Next source preview and tally - optional with RMC-140 accessory.
* No genlock required - frame synchronizer and TBC built-in for each active source for flicker-free switching.
* Voice sync - audio advanced to audio delayed, +3/-19 frames.
* Audio I/O:
** Input: unbalanced, 4 sources (A, B, C, D), Aux 1, Aux 2, stereo and microphone inputs.
** Output: unbalanced, two main stereo ouputs, 1 stereo microphone output.
* Joystick control can be used for either RGB color correction (white balance corrections) or position the PIP or Mosaic effect.
* PIP - two fixed sizes.
* Color processor - white balance for each input. Last settings saved at power up.
* Digital effects - 15 transitions plus border, six speeds, pus six special effects.
* Easy titling with Datavideo CG-100 Character Generator.
* SDI graphics overlay - use any SDI-based character generator with DSK (Down Stream Keyer). SE-800DV has SDI overlay built-in, SE-800AV requires upgrade card.
* Four tally outputs - requires RMC-140 accessory with red/yellow tally lights.
* GPI input trigger controls up to 30 pre-programmed effects in sequence.
* Headphone monitor.
* RS-232 remote control interface.
