Networking
| Supports ISDN connection |
N |
| Routing protocols |
IP |
| Data link protocols |
NAT, RIP1/2, DDNS, SNTP, DNS, IGMP, POP3, IGMP |
| VoIP protocols |
SIP, PSTN, G.711 A/m law, G.729, G.723, G.726, T.38, T.38, CNG, PSTN |
Security
| Firewall security |
NAT |
| Filtering |
Y |
Other features
| Maximum data transfer rate |
0.054 Gbit/s |
| Management platform |
SNMP |
| xDSL connection |
Y |
| Power supply type |
12V DC, 1.2A |
Protocols
| DMZ support |
Y |
| DHCP client |
Y |
| DHCP server |
Y |
| Supported network protocols |
RFC 2684, RFC 1483, RFC2364, RFC 1577, PPPoE |
DSL features
| DSL specification |
ADSL2+, ADSL2, ADSL2/2+, G.dmt.bisplus, G.dmt.bis, ANSI T1.413 Issue 2, G.dmt, G.hs |
| ADSL |
Y |
Management features
| Quality of Service (QoS) support |
Y |
| Web-based management |
Y |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
4 |
ADSL2+ Router - VoIP, Wireless & Firewall functionalities, 4x10/100 Mbps, 12/24 Mbps
ADSL2+ Router with VoIP, Wireless and Firewall functionalities.
Michelangelo VoIP 2 supports the ADSL2/2+ standard for the Internet access up to 12/24 Mbps and integrates VoIP functionalities based on the SIP protocol for a better interoperability with the Telecom Operators and with other VoIP equipments.
Equipped with two FXS ports (to connect the analog phones) to perform two VoIP calls at the same time. Also an FXO port is present for emergency calls and for the Backup over PSTN in case the ADSL or VoIP service is not available.
With Michelangelo VoIP 2 you can use also the voice supplementary services like the Call Hold, the Caller ID and the Call Diversion.
A 54 Mbps Wireless Access Point with WPA-PSK, WPA2-PSK and WEP 64/128bit encryption is integrated for secure radio transmissions.
The built-in Stateful Packet Inspection Firewall guarantees secure accesses and protects your PC from external attacks.
