Management features
| Multicast support |
Y |
| Quality of Service (QoS) support |
Y |
Data transmission
| MAC address table |
8000 entries |
| Supported data transfer rates |
10, 100, 1000 Mbit/s |
| Maximum data transfer rate |
1 Gbit/s |
Networking
| VLAN support |
Y |
| DHCP client |
Y |
| DHCP server |
Y |
| 10G support |
N |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
24 |
| Console port |
RS-232 |
| SFP module slots quantity |
4 |
| SFP/SFP+ slots quantity |
4 |
Protocols
| Management protocols |
SNMP v1, v2c, v3 |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
N |
VigorSwitch G2240 Gigabit Ethernet Switch - 24 Gigabit Ethernet Ports, QoS, Stackable, SNNP v1, v2c & v3
The VigorSwitch G2240 is a high-performance fully-managed Layer 2 Ethernet switch.
The G2240 is a high-performance fully-managed layer 2 Ethernet switch. Its specification is packed with advanced features to aid reliability and switching performance to your network. The G2240 has 24 Gigabit Ethernet Ports and four SFP ports (typically for fibre connection modules). The units can be stacked, meaning that up to 16 can be linked and managed from a single web interface. Features for Quality of Service (QoS), VLANs and network/switch security provide additional flexibility.
Comprehensive SNMP reporting enables your SNMP monitor to collect continuous data on real-time and historical performance and usage and locate network bottlenecks and spare capacity. The G2240 has four SFP (Fibre Module) ports. In comparison to 'copper' (RJ45), using fibre for uplinks provides longer range and reliience from electrical interference. Each of the four ports can be used instead of the corresponding copper port (Ports 21,22,23 and 24). The SFP port provides compatibility with your choice of SFP module and therefore the most appropriate fibre technology for your application.
