Dune HD Smart HE Extension

USB 2.0, eSATA, 1.2kg, black <b>Smart HE Extension Module</b>

The "Smart HE" extension module is intended primarily for use with Dune HD players, in particular, any of the base modules (players) of Dune HD Smart family or with Dune HD Max player. This module allows to extend Dune HD players capabilities with a rack for installation of 3.5 inch SATA HDD with hot-swap support. Besides, connection to a player may be performed by either USB 2.0 or eSATA interface.

Also, if desired, the Smart HE module may be used with a PC as a USB or eSATA HDD box.

Being connected to a Dune player or a PC via USB 2.0 interface (using the USB Slave connector on the rear panel of the extension module) the module also serves as a USB hub: two USB Host 2.0 connectors of the module may be used to connect additional external devices which are therefore made available to the Dune player or the PC.

Please pay attention to the fact that when the module is connected to a player or a PC using the eSATA interface, both USB Host 2.0 connectors of the module are inactive and may not be used!

Bundled with the HD Smart HE extension module there comes the 12V 3A power adaptor, USB 2.0 cable (Host-Slave), eSATA-eSATA cable, and the brief user guide.

Also please note that the product is not equipped with any means of active cooling (e.g. fans), because is intended firstly for using in noiseless installations in the scope of a home cinema system. Thus, to prevent overheating of devices, we strongly recommend to use together with this module only HDD models with low heat production, in particular, models intended for usage in satellite receivers (e.g. Green, EcoGreen HDD models and the like).