Edge10 4TB DAS801t

DAS801t, 4TB, SATA, 8.89 cm (3.5 ") , 2x eSATA DAS801t enhances your data storage by combining advanced RAID features typically seen on high-end data systems with low cost/ high capacity Serial ATA drives. By using industry standard SATA drives and Silicon Image Host Bus Adapters, you can achieve extraordinarily low costs while remaining assured that your data is protected against hardware failure.

The DAS801t software driver includes support for monitoring to predict suspect drives. DAS801t provides our highest commitment to data security through the use of RAID architecture to back up and protect data. RAID levels 1, 10, and 5 provide data security. DAS801t supports
sophisticated sparing support so that hardware failure risk can be minimized by automatically regenerating the failed disk’s data on a backup disk. The DAS801t software driver includes support for Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T. ) to predict disk failures. Drives can be moved between controllers without losing data.

- Two eSATA host ports to 8 SATA 3.5-inch HDDs, with HDD trays & door cover;
- Power and host status LED, and devices status and activity LED;
- Metal chassis (SECC) and plastic panel frame (ABS) with HDD trays (SECC and ABS) design;
- 150 (W) x 340 (H) x 340 (D) mm, NW: 5.5 Kgs, GW: 7.6Kgs;
- Design based on the Silicon Image SiI3726 Port-Multiplier with SiI3132R5 PCI-Express 1X HBA;
- Support Striped (RAID 0), Mirrored (RAID 1), Mirrored Striped (RAID 10), Parity RAID (RAID 5) modes, and
hot spare on Mirrored (RAID 1), Mirrored Striped (RAID 10) and Parity RAID (RAID 5) modes;
- Support Contiguous (Single Drive) & Concatenation (Combine Drive) modes;
- 300 watts switching power, 90 to 264Vac / 47~63Hz with CE/ FCC/ VCCI/ UL/ C-UL/ TUV/ CB/ BSMI/ CCC
requirement;
- Single packing (color box) and 2 in 1 outer box.