Power
| Power over Ethernet (PoE) |
Y |
Camera
| Minimum illumination |
1 lx |
Storage
| Built-in hard drive |
N |
| Card reader integrated |
Y |
System requirements
| Mac operating systems supported |
Y |
Performance
| PTZ control (Pan/Tilt/Zoom) |
Y |
Security
| IP address filtering |
Y |
| Video motion detection |
Y |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Ethernet LAN connection |
Y |
| Wireless technologies |
Wired |
Edimax IC-7000POE IP Camera wired / PoE 1.3MP pan/tilt H.264/mJPEG/MPEG SD
Power over Ethernet Triple-Mode Pan & Tilt Network Camera
• Complies with IEEE 802.3u & 802.3af standards
• High-speed triple-mode (H.264, MPEG-4 & M-JPEG) video compression
• Motorized pan & tilt (355° horizontal & 120° vertical)
• Multi-area motion detection
• SDHC/SD card slot for local snapshot and video storage
• 2-way audio, UPnP & DDNS support
• Remote monitoring via iPhone, iPad, Android phones, PC & Mac
Live Video Streaming
The Edimax IC-7000 V3 is tailor made to stream live video footage of your home wired or wirelessly over a network connection. You can check upon the security of your home, family, pets, or assets with the bundled viewer, which allows you access up to 16 Edimax network cameras simultaneously.
Motorized Pan & Tilt
With motorized pan and tilt, the Edimax IC-7000 V3 series gives you a wider viewing angle than the average network camera, making it ideal for surveillance purposes. The IC-7000 V3 series can pan ±355 degrees and tilt ±120 degrees, allowing you to monitor a large area with a single camera. You can set the Edimax IC-7000 V3 series to scan a pre-defined path automatically or even control the camera’s pan and tilt remotely via a web browser or the Edimax software utility.
Triple-Mode Video Compression (H.264, MPEG-4 & M-JPEG)
With triple-mode video compression support, the Edimax IC-7000 V3 series can ensure high video quality and high frame rate video streaming. Users can select H.264, MPEG-4 or M-JPEG video compression mode depending on preference and network settings.
Motion-Triggered Snapshots & Pre- and Post-Recording
The IC-7000 V3 series is designed with a powerful multi-area motion detection system. When motion is detected in the specified areas, the network camera will immediately take a snapshot of the detected motion and send the snapshot to the user via email or FTP. The multi-area motion detection function also works with the network camera’s pre- and post-recording feature. When motion is detected, the IC-7000 V3 series is able to produce video footage of the monitored area up to 5 seconds before the detected motion.
Supports 2-Way Audio
The Edimax IC-7000 V3 series is designed with 2-way audio support. It has a microphone and an audio output for speaker connection. By connecting speakers to the camera, users can remotely communicate with people at the site where the network camera is installed, or even ward off an intruder when necessary.
SDHC/SD Card Slot for Local Storage
The IC-7000 V3 series features an SDHC/SD card slot for local data storage. Should the network or Internet connection fail, the IC-7000 V3 series is able to save snapshots and videos locally on a SDHC or SD card.
