Features
Motor power |
1500 W |
Fuel tank capacity |
0.26 L |
Chain speed |
21 m/s |
Oil tank capacity |
0.21 L |
Chain bar length |
335 mm |
Displacement |
41 cm³ |
Automatic oiling |
Y |
Motor type |
2-stroke motor |
1.5 kW, 21 m/s, 11000 1/min
The GH-PC 1535 TC petrol chainsaw is a handy, efficient tool and practical helper for sawing firewood, for thinning out scrub, for removing branches and for cutting down trees. A quality rail and chain from OREGON ensure optimum cutting performance. Thanks to a choke and primer, the engine always starts without difficulty. The chain can be tensioned and changed without tools.
The GH-PC 1535 TC has good safety features. Pressure on the finger guard will trigger the chain brake and stop the chain within a few milliseconds. For safety in the event of the chain jumping off the rail, there is a chain catch. A large, robust claw stop ensures safe handling on felling and cutting-to-length jobs, and it also serves as a pivot point when sawing horizontal trunks. In idle mode, the centrifugal clutch disengages the chain from the engine. Thanks to the crank shaft with bilateral bearings, the engine runs with very low vibrations. For high user-friendliness even on long work sessions there is also an anti-vibration system. The cutter rail and chain are lubricated automatically. Complete with a petrol/oil mixing bottle, 95 ml of two-stroke oil and a cutter guard.
- OREGON high-quality rail and chain
- Tool-free chain tensioning and changing
- Anti-Vibrations handle - cushion shocks and reduces user fatigues
- Big metal claw
- Automatic lubrication of the chain
- Kickback protection and instant chain brake
- Auto-choke and Primer for a fast start
- Crank shaft mounted at two ends
- Centrifugal clutch for cutting tool
- Petrol/oil mixing bottle
- 95 mm 2-stroke oil
- Cutter guard