Eltako FAH60 Silver wall transmitter

FAH60 - Wireless outdoor brightness sensor, IP54, 60x46mm, Silver Wireless outdoor brightness sensor, 60x46mm, 30mm deep.

The electronic requires no intrinsic power supply, so there is no standby loss.

The wireless outdoor brightness sensor FAH60 powered by a solar module covers the range
from 0 to 30000 Lux. From approx. 300 Lux, it transmits a wireless telegram to the Eltako
wireless network every time there is a brightness change of more than approx. 500 Lux within
approx. 10 seconds.

If the brightness does not change, a control signal is sent approx. every 100 seconds.

New actuators FSR and FSB can cover the range from 0 to approx. 30 Lux using the twilight
switch function. A wireless telegram is sent about every 100 seconds within this range.
Starting in production week 28/2011: To teach-in in an actuator in teach-in mode, hold the supplied
blue magnet or any other magnet at hand below the point on the side panel of the sensor marked
by. This sends a teach-in telegram.

Solar-powered energy accumulator:
Before startup the energy accumulator must be charged.
The charge time is approx. 5 hours at 400 Lux. Keep the cover of the solar cell clean!

The protection class is IP54, the allowable ambient temperature is -20°C to +55°C.

For screw mounting or attachment with adhesive. The scope of supply comprises an adhesive foil.

Shading elements may not cover brightness sensors. Keep the cover of the solar cells clean!