Loudspeakers
| Woofer |
Y |
| Woofer diameter (imperial) |
4 " |
| Tweeter diameter |
1 " |
| Mid-range driver diameter (imperial) |
4 " |
| Number of speakers |
2 |
| Tweeter |
Y |
| Speaker position |
Satellite |
| Recommended usage |
PC |
Performance
| Bass adjustment |
Y |
| Treble adjustment |
Y |
Audio
| Total Harmonic Distortion (THD) |
10% |
| Frequency range |
60 - 20000 Hz |
| Signal-to-Noise Ratio (SNR) |
85 dB |
Additionally
| On/Off switch |
Y |
| Wireless technologies |
Wired |
64W RMS, 60 - 20 KHz, SNR - 85 dB, 2 x RCA
For the creation of the new Empire WB-64, we started from a consolidated project: the monitor from semi-professional studio Empire S-500. The WB-64 cabinet is made of MDF wood and features the same measures of the S-500, however, it is lighter to allow an easier wall or ceiling placement. They are available in both color White and Black to better match with the color of the walls in classrooms and meeting rooms, as well as with multimedia equipment currently used in schools and in laboratories such as Whiteboards and Interactive Monitors. This audio system is created to best meet the needs of construction of classrooms, meeting rooms, demo rooms, rooms with spreading sound, as well as for bars, restaurants, hotels, and all those places where it is required a quality sound. A frontal protection gives greater strength to the product: this is not removable, in this way the drivers remain covered and difficult to be damaged. Both woofers and the tweeters are wide-ranging and with a proper tuning with the respective cabinet enable Empire WB-64 to reproduce a natural sound and broad-spectrum, resulting in a perfect sound system. The WB-64 are two-way: the woofer is 4” with reinforced coil for clean and present deep bass and mid-bass, the 1” tweeter reproduce clear sound and very soft, giving the whole sound system a complete homogeneity. The brand-new Class D amplifier would be able capable of delivering more power, but to optimize the system and its longevity we have “limited” it to deliver 64 Watts total with 10% THD, 1 kHz. Two separate stereo inputs allow you to connect two sources different audio sources. Usually in classrooms LINE1 is connected to the LIM (or a multimedia monitor) and LINE2 is used to connect a secondary device (eg. Tablet, PC, Laptop / Mac, Smartphone, etc.). The control panel (On / Off, Volume, Bass, Treble) and all connections are placed on the side to be able to place both speakers on the wall: in this way everything is always at hand without the need to removing the case from the wall.
