Networking
| Full duplex |
Y |
| Networking features |
Fast Ethernet, WLAN |
| Compliance industry standards |
802.11b/g, 802.3/802.3u |
Operational conditions
| Non-operating relative humidity (non-condensing) |
10 - 95% |
Management features
| Media access protocol |
CSMA/CA(ACK) |
| Data link protocols |
TCP/IP |
| Web-based management |
Y |
| Supported protocols |
FCC, ETS |
Wireless LAN features
| Channels quantity |
13 channels |
| Frequency band |
2.412 - 2.484 GHz |
| Outdoor range |
200m |
Data transmission
| Supported data transfer rates |
10/11/108/100Mbps |
Additionally
| Indoors max range |
50m |
| Transfer rate (Mbps) |
100 Mbit/s |
| Ethernet LAN (RJ-45) ports quantity |
1 |
ENRXWI-SG, 802.11b/g, 802.3/802.3u, 108/100Mbps, 2412 - 2484 MHz, FCC, ETS
<b>Super-G Wireless Repeater</b>
Encore Super-G Wireless LAN Extender is a multifunctional wireless device. It functions in three modes: Extender, Access Point and Access Point Client. The Extender mode offers a simple and cost-effective way to expand the coverage area of your Super-G wireless network. It operates at a blazing speed of up to 108 Mbps.
<b>Extender Mode</b>
Place ENRXWI-SG within the range of your current wireless network. Subsequently, ENRXWI-SG can pickup signal from the wireless router (or access point) and transfer the signal further away than the original coverage area. You have thus effectively extended your wireless network without wiring or complicated configuration. Also, you can improve the reception at dead spots, areas characterized by poor signal quality, by placing ENRXWI-SG between the dead spots and the wireless router.
<b>Access Point Mode</b>
Connect ENRXWI-SG to your wired Ethernet router (using a RJ-45 cable). Configure ENRXWI-SG accordingly. Now, you have just upgraded your old wired router into a wireless Super-G router.
<b>Access Point Client Mode</b>
Connect ENRXWI-SG to the Ethernet port of you desktop or laptop computer (using a RJ-45 cable). Configure ENRXWI-SG accordingly. Now, you can use it like a Super-G wireless adapter enabling your computer to access wireless network.
Use ENRXWI-SG, in Extender Mode, to increase your wireless coverage over an extended area such as in a warehouse, multi-story house and public space. You can also use it in wireless hot spot or outdoors where you always need additional coverage for your wireless network. Encore Wireless Super-G LAN Extender is compatible with both 802.11b and 802.11g standards. For your protection and convenience, ENRXWI-SG comes with strong security features such as WPA-PSK, WPA2 and web-based configuration utility.
- Features 3 Operation Modes: Extender (or Repeater), Access Point and Access Point Client;
- Increases the coverage area of Super-G or 802.11b/g wireless networks in Extender Mode without additional wiring;
- Features strong wireless security: WEP, WPA, WPA-PSK, WPA2 and WPA-PSK2;
- Features web-based configuration tool;
- Backward compatible with 802.11b/g.
