Data transmission
Store-and-forward |
Y |
Switching capacity |
24 Gbit/s |
Management features
MIB support |
RFC1213, RFC1493, RFC1757, RFC2674 |
Switch layer |
L2 |
Traffic shaping |
Y |
Quality of Service (QoS) support |
Y |
Web-based management |
Y |
Networking
VLAN support |
Y |
IGMP snooping |
Y |
Port mirroring |
Y |
Broadcast storm control |
Y |
Rate limiting |
Y |
Link aggregation |
Y |
Spanning tree protocol |
Y |
Networking standards |
IEEE 802.1ab, IEEE 802.3af, IEEE 802.3at |
DHCP client |
Y |
10G support |
N |
Security
Security algorithms |
WPA2-PSK, WEP, WPA, WPA-PSK, WPA2 |
Static port security |
Y |
SSH/SSL support |
Y |
Access Control List (ACL) |
Y |
Packaging data
Cables included |
AC, LAN (RJ-45) |
Manual |
Y |
Quick start guide |
Y |
Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget |
130 W |
Power over Ethernet (PoE) ports quantity |
8 |
Power over Ethernet (PoE) |
Y |
Power
Power consumption (typical) |
130 W |
Energy Star certified |
N |
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity |
8 |
Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
Console port |
RJ-45 |
SFP module slots quantity |
2 |
Operational conditions
Operating relative humidity (H-H) |
5 - 95% |
Storage temperature (T-T) |
-40 - 70 °C |
Performance
Internal memory |
256 MB |
Firmware upgradeable |
Y |
Flash memory |
32 MB |
Stackable |
N |
Protocols
Management protocols |
SNMP v1/v2c/v3, CLI, RMONv1, SYSLOG |
Weight & dimensions
Depth |
228.6 mm |
Weight |
1995 g |
Width |
330.2 mm |
Height |
43.9 mm |
Design
LED indicators |
Activity, LAN, Link, PoE, Power, Y |
Form factor |
1U |
Rack mounting |
N |
Additionally
Colour of product |
Black |
Operating temperature range (T-T) |
0 - 50 °C |
24Gbps, Gigabit Ethernet, RJ45, 256MB RAM, 32MB Flash, 1995g, Black
Power, connect, and manage Neutron Series Access Points throughout your company
The EWS5912FP is a Neutron Series Managed Wireless solution 8-Port Gigabit PoE+ Layer 2 Switch with 2 Gigabit uplink ports and 2 Dual-Speed SFP ports for fiber uplinks. As part of an EnGenius Neutron Series wireless management solution, the EWS5912FP can control up to 20 Neutron Series Wireless Access Points to provide a single location with which to centrally configure and manage the entire network.
The EWS5912FP is a Neutron Series Managed Wireless solution 8-Port Gigabit PoE+ Layer 2 Switch with 2 Gigabit uplink ports and 2 Dual-Speed SFP ports for fiber uplinks. As part of an EnGenius Neutron Series wireless management solution, the EWS5912FP through its browser-based GUI (Graphical User Interface) can discover, configure, manage and monitor up to 20 Neutron Series Wireless Access Points.
The controller mode of the Switch provides a suite of wireless management features for IT managers to configure Neutron Series Access Points. Features include clustering Neutron Series Access Points in clusters with identical policies, Access Point IP Auto-Discovery, remote Access Point rebooting for hard-to-reach / previously deployed units, and a host of visual monitoring features including topology and floor plan view modes for the mapping out and tracking of networks. The controller also features a statistics section for record traffic tracking and comparison between units or over-time comparisons.
The interface also lets IT managers apply configuration changes to multiple Access Points or the entire network simultaneously. A dashboard provides instant access to a variety of clients, network information, and events, while a real time map displays Access Point locations and network topology for planning and deployment.
Managing the wired portion of the network is also easy using the same browser-based interface. The Switch supports IEEE 802.1p QoS which automatically classifies and prioritizes compliant device traffic to ensure that time sensitive data such as VoIP is forwarded without delay.
The Switch’s Gigabit Ethernet ports support IEEE 802.3at/af PoE and can supply up to 30 watts per port for a total PoE budget of 130 watts. The 8 Gigabit ports provide seamless connectivity for devices and applications that require high speed network access and reduce bottlenecks that can interrupt communication. The Switch’s two SFP slots accept fiber transceivers for extending the wired network beyond the limitation of Ethernet cabling. This is especially useful for schools with satellite classrooms, or for hotels and resorts, or other businesses with multiple building properties.
The EWS5912FP includes bracketing hardware for mounting into a switch rack.