Video
Analog signal format system |
NTSC, PAL |
Privacy masking |
Y |
Noise reduction |
Y |
Full HD |
Y |
Image sensor
Optical sensor size |
1/3 " |
Progressive scan |
Y |
Sensor type |
CMOS |
Performance
Day/night mode |
Y |
PTZ control (Pan/Tilt/Zoom) |
Y |
Camera
Camera shutter speed |
1/25 to 1/50.000 s |
Minimum illumination |
0.01 lx |
Night vision
LED type |
IR |
Night vision |
Y |
Night vision distance |
50 m |
Power
Power over Ethernet (PoE) |
N |
Power consumption (max) |
4.5 W |
DC-in jack |
Y |
Additionally
Ethernet LAN connection |
N |
Wireless technologies |
Wired |
1/3" CMOS, PAL/NTSC, 1920x1080, ICR, 52dB, IP66, AGC, ICR, DNR, Black
TurboHD
Safeguard your existing cabling infrastructure.
TheTurboHD is a tri-hybrid technology that allows to upgrade your existing security system as it supports SD cameras, Hikvision and EPCOM IP cameras and HTVI cameras and DVRs. This means that you can upgrade your whole system to the newest technology little by little by adding a DVR and start replacing outdated, broken cameras on your current system while including IP network cameras on new sections you might want to cover. TurboHD will give you a delay free, full HD 1080p image through coaxial cable.
TurboHD eliminates the need to run RS485 cable to configure a camera or to control PTZ domes. Just access the camera menu, modify the dWDR intensity, and access the advanced settings to get the most of your TurboHD system.
Every TurboHD DVRs allow to access these menus by connecting the camera with coaxial cable or UTP (Cat5, Cat6).
All of this makes TurboHD the fastest equipment to install and easiest to personalize to your own needs.
- Image Sensor: 1/3” EPCOM TurboHD CMOS
- Real Day & Night mechanical cut filter ICR
- Smart IR LEDs spread up to 164ft (50m)
- Indoor & Outdoor at low light illumination
- Power Source: 12 Vdc at 4.5 W