Packaging content
Manual |
Y |
Rack mount kit |
Y |
Bracket |
Y |
Rubber feet |
Y |
Screws included |
Y |
Resource CD |
Y |
Performance
Waveform |
Sine |
Noise level |
50 dB |
Audible alarm(s) |
Y |
UPS topology |
Line-Interactive |
Power protection features |
Overheating, Overload, Short circuit |
Number of input phases |
1 |
Automatic Voltage Regulation (AVR) |
Y |
Audible alarm modes |
Alarm when on battery, Fault, Low battery alarm, Overload alarm |
Design
Rack capacity |
2U |
Form factor |
Rackmount/Tower |
Display |
LCD |
Power
Input operation voltage (max) |
300 V |
Efficiency |
96% |
Emergency Power Off (EPO) |
Y |
Output voltage THD |
3% |
Power supply input frequency |
50/60 Hz |
Output power capacity |
3000 VA |
Crest factor |
3:1 |
Output operation voltage (min) |
220 V |
Output operation voltage (max) |
240 V |
Output power factor |
0.9 |
Output voltage regulation |
5% |
Output power |
2700 W |
Ports & interfaces
AC outlet types |
C13 coupler, C19 coupler |
USB 2.0 ports quantity |
1 |
USB port |
Y |
AC outlets quantity |
9 AC outlet(s) |
Emergency Power Off (EPO) connector |
Y |
SmartSlot |
Y |
Operational conditions
Operating relative humidity (H-H) |
0 - 95% |
Weight & dimensions
Depth |
438 mm |
Width |
86.5 mm |
Height |
608 mm |
Battery
Hot-swap battery |
Y |
Battery recharge time |
4 h |
Battery voltage |
72 V |
Typical backup time at half load |
7 min |
Typical backup time at full load |
3 min |
Cold start |
Y |
Automatic battery test |
Y |
Number of batteries supported |
6 |
Technical details
Charge current |
1.5 |
Output frequency |
50/60 Hz |
Additionally
Colour of product |
Black |
RS-232 port |
1 |
Operating temperature range (T-T) |
0 - 40 °C |
3000 VA, 2700 W, LCD, AVR, USB, RS-232
- Boost and trim Automatic Voltage Regulation (AVR)
- Overload, short-circuit, and overheat protection
- Microprocessor control guarantees high reliability
- Intelligent LCD display
- Self-monitoring and fault diagnosis
- Load segments control
- Enable to extend runtime with scalable External Battery Module (EBM)
- Multiple communication ports: USB, RS232, dry contact, EPO, SNMP (optional)
- Rack-mount/tower installation
- Start-up without mains present (Cold Start)
- Expansion slot for optional remote management card (SNMP/Web-based)