Folex TRANSFER JET ST White photo paper

TRANSFER JET ST, A4 (210x297mm), 10pcs Special coated paper to print your own design onto white or light coloured T-shirts, caps or any other cotton based fabric. Your image can even be printed in high resolution. After printing, transfer the carrier image onto the fabric with the use of a household iron.

<b>Characteristic</b>
- Suitable for Ink Jet Printer
- Instant dry coating
- Heat-Press activation
- Electric Iron activation
- High resolution
- No bleeding

<b>Compatibility</b>
- Useable on most large format Ink Jet printers using solvent ink systems (Eco-, Light-, Mild- Solvent inks and similar inks).
- Not recommended for printing with oil or water based inks

<b>Handling</b>
- A preconditioning period of 24 hours within the printing environment is recommended.
- Heating system in printer possible up to approx. 48°C. Higher temperature may cause film deformation.
- Between 15-30°C and 30-70% r.h.
- Printer set-up: vinyl, coated paper, or similar
- Lamination: cold or heat laminates (low-temp) possible but not necessary due to water-proof prints.
- For correct feeding please follow the equipment suppliers manual.
- Ink Load: approx. 220 - 280 % (may vary according to ink system).
- Avoid fingerprints on printing side.

<b>Storage</b>
- Unopened in original packaging storage time is minimum 1 year after shipment (under recommended storage conditions).
- Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.