Performance
| Maximum transfer distance |
600 m |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
300m UTP cat5e/6, RJ45, Black
<b>Overview</b>
The FS-4301VPD video balun is a passive (non-amplified) device that allows the transmission of real-time CCTV video signal via cost-effective Unshielded Twisted Paired(UTP) cable. Baseband (composite) signals of any type are support
Used in pairs, FS-4301VPD eliminates costly and bulky coaxial cable, allowing live CCTV color video signal up to 1312ft (400m), power transmission up to 656ft(200m) and PTZ signal up to 984ft(300m).
The superior interference rejection and low emissions of the FS-4301VPD allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. FS-4301VPD has built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.
<b>Wire and Cable Recommendations</b>
FS-4301VPD is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG.. Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punc h-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST
BE removed from the pair.
For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.
