Technical details
| Operating frequency |
869.25 MHz |
| Built-in auto dialer |
Y |
| Auto-redialing |
Y |
Security
| Maximum operating distance |
200 m |
| Key generation |
N |
| Tamper switch |
Y |
| Built-in siren |
Y |
| Code hopping system |
Y |
| Audit log |
N |
Power
| Power consumption |
450 mA |
| DC-in requirements |
12-16V, 1A |
| Power failure detector |
Y |
| Battery low indication |
Y |
| Standby current |
50 mA |
FS280 Security Console
FS280G FEATURES
-Home Arm/Away Arm and Disarm system & trigger Panic or Silent Panic by remote control.
-Total environmental protection, intrusion, Smoke/Fire/Gas/ and Sudden Medical Emergencies.
-Built-in Auto dialer contacts Emergency phone numbers play corresponding Voice messages.
-Low battery supervision on main console and on each individual sensor.
-Code hopping system uses over one million different code combinations to prevent intruders.
-EEPROM safely stores 32 sec of Emergency messages & 6 telephone numbers. Calls any type of phone number.
-Can command strategically deployed FS143HS wireless external 110dB siren/strobes.
-Built-in output terminal for connection to any external siren/strobe and NC/NO switch.
-Built-in panic and zone 4 two input terminal NC type for external wire sensors.
-Built-in rechargeable back-up battery and tamper switch and power failure detector function.
-Telephone line interruption alarm, Progress tone decoder and auto busy redial controller.
-Build-in 2-phone numbers for digital dialer to Central Monitoring Station and 4-phone number for voice dialer.
-Hands-free speakerphone, 2-way voice communication. After the connection of emergency call, the called party can listen-in or talk with.
-Real Door/Window Open/Closed monitoring warns users of any open access points prior to Arming.
-12 alarms zone and 80 channels report to LCD display wireless sensors number and function.
-Can call-in setup main console working mode at anywhere by phone call-in.
-KEY button and LCD with blue color backlight 10 seconds delay auto OFF.
-The LCD Keypad can setup clock and day that can setup time to control FS280 working mode.
-It can remote setup program function also can report data to display on LCD.
-One LED to indicate the TX/RX data working and alarm condition.
-The LCD display FS280 main console program manual that user can easy found item to setup.
-With a mast password and 8 user password code to setup main console.
-The FS280 can option the GSM dialer module or GSM dialer with IP Ethernet module that can install at main board of the console case inside.
-The GSM module auto dialer offers Dual-Band EGSM900 and GSM1800 system that adopts SIMCOM modules. It is approved by R&TTE and GCF.
-Build-in back-up line GSM system can send to report 16 kind of alarm event SMS.
-Backup line function, in case of disconnect the PSTN it can auto dial divert function.
-Can PSTN phone line or GSM system call-in setup security main console working mode.
-Automatic sending of an event's text messages to up to 16 alarm event.
-Can call-out any phone number including PSTN phone systems, cellular phone.