Data transmission
| MAC address table |
16000 entries |
| Store-and-forward |
Y |
| Supported data transfer rates |
10/100/1000 Mbps |
| Maximum data transfer rate |
10 Gbit/s |
| Number of VLANs |
1000 |
Operational conditions
| Heat dissipation |
252.5 BTU/h |
Other features
| Latency |
8µs |
| Bandwidth |
152 Gbit/s |
| Wi-Fi |
N |
| Networking features |
Gigabit Ethernet |
Management features
| MIB support |
Private-MIB, RMON-MIB |
| System event log |
Y |
| Web-based management |
Y |
Networking
| Port mirroring |
Y |
| Broadcast storm control |
Y |
| IGMP snooping |
Y |
| Auto MDI/MDI-X |
Y |
| Link aggregation |
Y |
| Spanning tree protocol |
Y |
| Flow control support |
Y |
| DHCP client |
Y |
| 10G support |
Y |
| Full duplex |
Y |
Security
| Static port security |
Y |
| SSH/SSL support |
Y |
| MAC address filtering |
Y |
| Access Control List (ACL) |
Y |
Protocols
| Supported network protocols |
IPv4, IPv6, FTP, TFTP, BOOTP, SNTPv4, CDPv2, GVRP, GARP, GMRP, VTPv1/v2 |
| Data link protocols |
LLDP |
| Management protocols |
IGMPv1/v2/v3, CLI, SNMPv1/v2c/v3 |
Performance
| Stackable |
Y |
| Internal memory |
512 MB |
| Flash memory |
64 MB |
Power
| Number of power supply units |
1 |
Optical fiber
| Transmission distance (max) |
0.3 km |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
8 |
| Fiber ports quantity |
2 |
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-T, 1000BASE-TX, 100BASE-T, 10BASE-T |
Design
| Safety |
ULc/us |
| Rack mounting |
N |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
N |
Additionally
| Jumbo Frames support |
Y |
| Wireless technologies |
Wired |
Primergy BX/IBP 1GB 36/8+2, Gigabit Ethernet, L2+, 8 x RJ45, 2 x 10Gb SFP+, VLAN, DHCP, 16K MAC, CoS, ACLs, CLI, 74W, 1.36kg, Grey
Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
PRIMERGY BX Connection Blades simplify network connectivity for PRIMERGY BX Blade Servers, ensuring fast, reliable and flexible access to data and storage networks. All Connection Blades are integrated within the BX chassis and benefit from a high-speed midplane as well as from energy-efficient power and cooling. A wide range of different Connection Blades are available to address current and next-generation I/O requirements for standards-based Fibre Channel, InfiniBand and Ethernet networks. PRIMERGY BX400 system units support up to 4 Connection Blades, PRIMERGY BX900 up to 8, thus implementing flexible and scalable connections in order to meet the requirements arising from dynamic workloads.
Today’s technological specifications offer speeds of up to 8 Gb for Fibre Channel, 40Gb InfiniBand, and up to 10 Gb for Ethernet connections per Uplink port. All the facets of Connection Blades are available, from highly functional self-developed models to brand models from Brocade or Mellanox; all feasible requirements can thus be met.
PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
The PRIMERGY Ethernet Switch/IBP 36/8+2 is an integrated 1 Gb Connection Blade for use in the PRIMERGY BX400 and BX900 chassis. It can be installed in each Connection Blade slot (4x in BX400, 8x in BX900) and provides 36 downlink ports each with 1 Gb to the midplane to connect with the Server Blades. The module contains 8 uplink ports each with 1 Gb plus 2 uplink ports each with 10 Gb; Layer 2+ functionalities are supported.
The Intelligent Blade Panel mode combines the advantages of a switch regarding cable and port consolidation with the Pass-Thru advantage of total (VLAN) transparency without protocol compatibility problems occurring. Server Blade LAN ports may be grouped together with one or more external ports, into independent named port groups. Based on the so-called Management VLAN Grouping each Server Blade can be assigned a separate, VLAN-based management access.
This Connection Blade is prepared for the simple creation of large homogeneous I/O domains by combining (stacking) up to 8 modules within one or more PRIMERGY BX system units.
