Networking
| Supports ISDN connection |
Y |
| Routing protocols |
RIP-1, RIP-2 |
| Management protocols |
SNMP, HTTP |
| VoIP protocols |
MGCP, SIP |
Security
| Authentication method |
RADIUS, PAP, CHAP, X.509, TACACS, TACACS+, MS-CHAP, MS-CHAP v.2 |
Other features
| Maximum data transfer rate |
0.054 Gbit/s |
| xDSL connection |
Y |
| Internal memory |
32 MB |
| Flash memory |
8 MB |
| Bandwidth |
2.4 GHz |
Protocols
| Supported network protocols |
TCP/IP, L2TP, IPSec, PPPoE |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
5 |
R3000w ADSL Router
The bintec R3000 is an ADSL multi-protocol router equipped for versatility and flexibility with an integrated ADSL(2+) modem and automatic ISDN backup. The R3000/R3000w’s ADSL modem is compliant with the ANNEX-A and ANNEX-B standards, which means it can be used in many different countries around the world. It has been specially designed to accommodate high-speed Internet access and remote access for use in small to medium-sized companies or remote offices. The device already comes complete with 10 IPSec tunnels including hardware acceleration. Up to 100 additional IPSec tunnels can be added to the system with the purchase of the corresponding license. The second integrated ISDN S0 interface can also be activated optionally with the purchase of a license.
The basic version offers an SIP and MGCP Application Level Gateway, enabling it to be connected directly to IP telephones in the network or registered with the VoIP provider. The R3000(w) automatically controls the firewall, which makes it considerably easier to configure. It has also been conveniently equipped with a DSP slot for future use as a VoIP media gateway.
As a wireless router, the bintec R3000w supports the 802.11a/b/g/h standards with a gross transfer rate of 54 Mbps. In addition to WEP encryption, the secure WPA or WPA2 modes for the use of preshared keys or the integration into a Radius server are available to guarantee secure data transmission via the air interface. Access is controlled on the port level via 802.1x. The multi-SSID function makes it possible for build several different user groups, each with their own guidelines. The WDS function (Wireless Distribution System) can be used to create wireless infrastructures for application scenarios in which a wired solution would be too expensive or technically impossible.
