Technical details
Vertical scan range |
50 - 60 Hz |
Ports & interfaces
Host interface |
HDMI |
Output interface |
Composite, S-Video |
Power
USB powered |
N |
Input voltage |
5 V |
Additionally
Display scan frequency (horizontal) |
31 - 70 kHz |
1 x HDMI, 1 x Composite, 1 x S-Video, L/R RCA audio, S/PDIF, 1080p, NTSC / PAL
Watch HDMI Video on your Composite or S-Video System -- with Audio
The new GefenTV HDMI to Composite Scaler lets you transform HDMI video in resolutions from 480p to 1080p into Composite video or S-Video format, properly sized to view optimally on your display.
How It Works
Simply connect your HDMI video source to the HDMI input jack of the GefenTV HDMI to Composite Scaler. Connect your Composite or S-Video display cable to the correct video output jack on the Scaler's rear panel. RCA-type analog audio output jacks and Coaxial S/PDIF digital audio output jacks allow for the connection of an audio receiver or other device to receive the audio signal embedded in the HDMI signal. Power-cycle all connected components. You will then have HDMI video playing on your Composite or S-Video display with simultaneous audio output.
Note: This device does NOT convert HDCP.
This device supports both NTSC and PAL video standards.
This device maintains the aspect ratio of the original signal.
The main purpose for the GTV-HDMI-2-COMPSVID is to downscale high definition video to standard definition NTSC / PAL, from digital to analog TV signals. The GTV-HDMI-2-COMPSVID does not accept standard-resolution 15KHz (Horizontal Frequency) video signals as input (i.e. 480i and 576i resolutions). Source devices operating at resolutions of 480i / 576i will very likely have analog outputs which can be used to directly connect to display devices in these cases.
Supported HDTV input resolutions include:
480p@60Hz
576p@60Hz
720p@60Hz
1080i/p@60Hz
Supported PC input resolutions include:
640x480@60Hz
800x600@60Hz
1024x768@60Hz
1280x1024@60Hz
1600x1200@60Hz