Weight & dimensions
Heatsink dimensions (W x D x H) |
65 x 130 x 159 mm |
Power
Maximum current |
0.2 A |
Voltage |
12 V |
Performance
Maximum air pressure |
1.6 mmH2O |
Noise level (low speed) |
12 dB |
Noise level (high speed) |
28 dB |
Rotational speed (min) |
750 RPM |
Rotational speed (max) |
1800 RPM |
Type |
Cooler |
Suitable for |
Processor |
Number of fans |
1 fan(s) |
Fan diameter |
120 mm |
Supported processor sockets |
Socket AM3, Socket AM3+, Socket AM2+, Socket FM2, Socket AM2, Socket FM1 |
Number of heat pipes |
7 |
Speed detection |
Y |
Maximum airflow |
98.5 cfm |
Minimum airflow |
57.9 cfm |
7 Power Heatpipes, 120 mm fan w/ PWM & LED, 720 g
Applications:
Intel Socket 775, 1366, 1155, 1156 & 2011*:
CPU: All Pentium D/ Pentium 4/ All Celeron D/ All Pentium Dual-Core/ Extreme/ All Core 2 Extreme/ Core 2 Quad/ Core 2 Duo, Core i5, Core i7
AMD Socket AM2/ AM2+/ AM3/ AM3+/ FM1 & FM+2:
CPU: All Athlon 64 X2, Athlon 64, All Athlon II, All Sempron, Phenom, Phenom II, All A Series AMD APU Llano
*Mounting clip for socket 2011 needs to be purchased separately.
All brands and trademarks are the property of their respective owners.
In comparison to its predecessor the Rev. 2 GX-7 included the Slim 12 PL Blue fan which is more compact,
allows for better RAMsink clearance and even easier installation. The Slim 12 PL Blue has a Hydro Dynamic bearing and a dimension of 120x120x15.8 mm. In addition the fan features blue LED’s. The fan also includes a premium PWM control, so the temperature can be controlled precisely by the BIOS. Further high-end GCExtreme thermal compound is included in the package.
Design Concept:
Traditional heat pipe arrangement of high-end heatsink heatpipes are usually soldered on one row. Therefore the heat absorption capacity of the outer heatpipe will be negatively affected when there are more than 5 heatpipes.
To solve this problem a special array of heatpipes was used on Rev. 2 GX-7 to take full advantage of all 7 6mm heatpipe heat transfer capacity. On Rev. 2 GX-7 two heatpipes were soldered on top of three middle heatpipes.
Traditional heatpipe arrangement
Unique heatpipe arrangement on Rev. 2 GX-7 to take full advantage of all 7 heatpipe
Air Flow Concept:
The fins in the middle part of the heatsink of Rev. 2 GX-7 were designed in a V-shape. This allows the cooling air to reach the heatsink module more evenly. Thanks to some openings inside of the heatsink and near the heatpipes let fresh-air flows in from the top and the bottom to zones normally poorly ventilated and eliminates the creation of hotspots from building. The unique heatsink shape supports dual fans.
Besides the multi-award winning high performance GC-Extreme thermal compound additionally mounting clips for AMD AM2/ AM2+/AM3/AM3+/FM1/ FM2 and Intel 775, 1366, 1155, 1156 sockets and back plates for Intel LGA 775, Core i5 and Core i7 boards are all included. The LGA 2011 mounting clip needs to be purchased separately.