Performance
NVIDIA G-SYNC |
Y |
DirectX version |
12.0 |
OpenGL version |
4.5 |
NVIDIA GameWorks VR |
Y |
NVIDIA 3D Vision |
Y |
Shader model version |
5.1 |
PhysX |
Y |
TV tuner integrated |
N |
Full HD |
Y |
HDCP |
Y |
Processor
Processor frequency |
1632 MHz |
Graphics processor family |
NVIDIA |
CUDA |
Y |
Parallel processing technology support |
2-Way SLI |
Maximum digital resolution |
7680 x 4320 pixels |
Processor boost clock speed |
1746 MHz |
FireStream |
N |
System requirements
Linux operating systems supported |
Y |
Ports & interfaces
DVI-D ports quantity |
1 |
Interface type |
PCI Express x16 3.0 |
DisplayPorts quantity |
3 |
HDMI ports quantity |
3 |
DisplayPort version |
1.4 |
Memory
Memory bus |
352 bit |
Memory clock speed |
11448 MHz |
Discrete graphics adapter memory |
11 GB |
Power
Supplementary power connectors |
2x 8-pin |
Minimum system power supply |
600 W |
Design
Number of slots |
2 |
Form factor |
ATX |
Cooling type |
Active |
Additionally
Graphics controller |
GeForce GTX 1080 Ti |
Dual-link DVI |
Y |
NVIDIA GeForce GTX 1080 Ti, PCI Express x16 3.0, 11GB GDDR5X, 352 bits, 3 x DisplayPort, 3 x HDMI, 1 x DVI-D
AORUS PERFORMANCE
AORUS graphics cards are crafted for perfection in pursuit of the ultimate graphics experience for gaming enthusiasts. Based on the revolutionary NVIDIA® Pascal™ GPU architecture, AORUS graphics card brings you incredible gaming experience.
- GPU Gauntlet™ Sorting
- Pascal-powered graphics card give you superior performance and power efficiency
- Support up to 8K display @60Hz
- Outstanding performance for Virtual Reality gaming
AORUS ALL-AROUND COOLING SOLUTION
AORUS provides the all-around cooling solution for all key components of the graphics card. We take care not only GPU but also VRAM and MOSFET, to ensure a stable overclock operation and longer life. On the front side, the large copper base plate dissipates the most heat from the GPU and VRAM. On the back side, the copper back plate dissipates the heat from the GPU back side. All other key components are taken care of very well by the WINDFORCE cooling module. AORUS ensures the customer a better cooling solution in many ways.
AORUS COOLING
WINDFORCE STACK COOLING SYSTEM
WINDFORCE STACK
All new WINDFORCE Stack cooling with 3X 100mm fans in an innovative stacking structure for enhanced heat dissipation.
3X 100MM FANS
The 3x 100mm stack fans provide larger and more smooth airflow. And with more heatsink coverage than 3x 80mm fans, WINDFORCE stack fans will have 10% better cooling performance.
<300MM
Make 3x 100mm stack fans into less than 300mm length area. To concentrate and enlarge the airflow on the whole heatsink for the most efficient heat dissipation.
ALTERNATE SPINNING
The middle fan spins in the reverse direction to optimize the airflow to dissipate the heat more effective for accomplishing higher performance at a lower temperature.
UNIQUE BLADE FAN
The airflow is spilt by the triangle fan edge, and guided smoothly through the 3D stripe curve on the fan surface, effectively enhancing the airflow by 23% over the traditional fans.
DOUBLE BALL BEARING
The double ball bearing structure has better heat endurance and efficiency than sleeve structure.
3D ACTIVE FAN
The AORUS graphics cards are equipped with 3D-Active Fan. The fans will remain off when the GPU is under a set loading or temperature for low power gaming. The LED fan indicator on the top of the graphics card provides an instant display of the fan status.
THE STRIPE MATTERS
With the better system airflow, the direction of the copper plate will help to increase the cooling performance.
ANGULAR FIN DESIGN
The angular and unequal fins height does not only channel the airflow through the fins and enlarge the contact surface but also results in a lower noise level and better cooling capacity.
COMPOSITE HEAT-PIPES
The composite heat-pipes combines both thermal conductivity and phase transition for efficiently managing the transfer of heat between two solid interfaces which increases 29% of cooling capacity.
AORUS OUTLOOK
RGB FUSION
With 16.8M customizable color options and numerous lighting effects, you could now choose the right scheme for your gaming rig through AORUS graphics engine.
CYCLING
Smoothly cycles through all colors
CONSISTENT
Choose a color for static light
FLASH
Choose a color for flash effect
DUAL FLASH
Choose a color for double flash effect
BREATHING
Choose a color to fade in and out
AORUS VR LINK
SO EASY TO VR
AORUS VR Link features 1 extra front-facing and 2 rear HDMI ports, letting you connect a VR device and up to 2 HDMI monitors at the same time without having to swap cables, so you can flexibly set up a display configuration that best fits your gaming needs.
MULTI DISPLAY CONFIGURATION SUPPORT
AORUS VR Link is the only output technology in the market that supports the following combinations of displays without any adaptors required. (VR Headsets are connected via HDMI)
Protection Metal Back Plate
Glorious black metal back plate provides the solid protection, strengthens the structure and inspires the passion for gaming.