GIRA 210300

KNX Brightness Controller - 2-point control (switching) or constant light control (dimming above value) can be configured.
- Constant light control: max. five various dimmable light groups can be set via a brightness value.
- 2-point control: "automatic switch-on only" and "automatic switch-off only" of lighting are possible.
- Transmission of measured brightness value as 2-byte value to the bus. Transmission in case of modification, for a read request, or cyclically.
- Cyclical transmission of switching and dimming value commands for light control.
- Behaviour can be configured following bus voltage recovery.
- Specified setpoint value for brightness control via parameter or via the bus with 2-byte communication objects.
- Calibration of sensor brightness value determined by device via independent reference measurement and bus telegram.