Technical details
| Drilling diameter in concrete (max) |
24 mm |
| Drilling diameter in wood (max) |
32 mm |
| Drilling diameter in steel (max) |
13 mm |
| Chuck type |
SDS Plus |
| Vibration emission (concrete) |
15.3 m/s² |
| Impact rate |
3950 bpm |
| Impact energy |
2.7 J |
| Nominal input power |
730 W |
| Forward/Reverse operation |
Y |
| Variable speed |
Y |
| Rated speed |
1050 RPM |
| Uncertainty coefficient (concrete) |
1.5 m/s² |
Packaging content
| Carrying case |
Y |
| Side handle included |
Y |
DH24PG, 730W, 2.7kg
Approximately 2 times longer life achieved by reliable structure that includes a hammering mechanism same as Hitachi large hammers.
When using a cold chisel or cutter, the orientation of the tool tip can be adjusted by setting the change lever as shown on the left.
A bit can be mounted by simply inserting it into the tool holder.