Features
| Minimum watering time |
2 min |
| Maximum watering time |
60 min |
| Connecting thread supported |
1/2, 1, 3/4 " |
| Minimum operating pressure |
0.1 bar |
| Number of outlets |
1 |
| Timer modes |
Automatic watering, Manual watering |
| Control type |
Buttons, Rotary |
| Maximum operating pressure |
10 bar |
| Built-in display |
N |
Power
| Battery type |
AA |
| Battery level indicator |
Y |
| Number of batteries supported |
2 |
60 minute, 2 x AA batteries, 1″ BSP, 1/2″ BSP, 3/4″ BSP, up to 10 Bar
A tap mounted watering controller that automatically waters every day at sunrise and sunset, the best time to water your garden
- Easy to set up
- Day light sensor automatically adjusts daily watering schedule to coincide with changing time of sunrise and sunset
- Manual water now button for 60 minutes of watering at any time
The majority of gardeners prefer to water at sunrise or sunset. It’s the best time to minimise water evaporation and leaf scorch, but it is not always convenient to do it yourself at these times of the day.
Day Light Sensor The Hozelock Sensor Controller takes care of this for you as it includes a day light sensor that automatically adjusts your watering schedule to start at sunrise and sunset, every day.
No need to programme ever again, it will automatically change the start times to coincide with sunrise and sunset as the seasons change.
Watering Schedule You can select from 2, 5, 10, 20, 30 or 60 minutes and is easy to adjust in case you need to react to changing weather conditions, without ever having to refer back to the instruction book.
Water Now If you need to dispense water outside of the automatic schedule you can use the Water Now button to turn on the water. Press once and the unit can be turned on for a 60 minute duration or simply press again to cancel the operation for shorter periods.
Battery Status Simply press the button to check the status of the batteries. The LED lights will illuminate to indicate the strength of the remaining battery life.
Failure Prevention Mode A built in safety feature detects when the battery levels have dropped to a level that could fail whilst a watering schedule is in progress. The LED indicator lights will flash red when the batteries need to be replaced.
Easy to Install The Sensor Controller is easy to set up, simply insert 2 x AA batteries (not supplied) and select the required watering pattern from the dial. No complex programming skills required. It is supplied with a choice of 21mm (1/2” BSP), 26.5mm (¾” BSP) or 33.3mm (1” BSP) adaptors for connection to most garden taps.
Versatile Usage The Sensor Controller is a versatile unit that can be used with Garden Sprinklers (up to 10 Bar), low pressure micro irrigation watering (1.5 Bar), or Water Butts (0.1 Bar), due to the unique ball valve component.
