Ports & interfaces
| Host interface |
SATA |
| SATA revision |
3.0 |
| Internal |
Y |
Performance
| Hot-swap |
Y |
| Data transfer rate (max) |
6 Gbit/s |
Other features
| Mac compatibility |
Y |
| Data transfer rate |
6000 Mbit/s |
System requirements
| Mac operating systems supported |
Y |
Full Metal Dual 2.5" SATA HDD / SSD to 3.5" SATA HDD RAID Converter / Mounting Kit f / Internal 3.5” Drive Bay
ICY DOCK EZConvert Pro MB982SPR-2S R1 is a full metal dual drive 2.5” SATA HDD / SSD to 3.5" SATA HDD converter with built-in RAID 0 (FAST), RAID 1 (SAFE), JBOD and BIG functions. The MB982SPR-2S R1 converts 2 x 2.5" SATA hard drives or SSD from 5 – 9.5mm drive height into an exact same dimension, screw holes and connector locations of 3.5" SATA hard drive. That’s been said, with EZConvert Pro MB982SPR-2S R1, you can easily add a 2.5” HDD / SSD RAID array anywhere a 3.5” SATA drive is used such as internal 3.5" drive bay, custom build 3.5" HDD slot or pre-existing 3.5" hot-swappable trays, without needing to add a RAID controller card and 2.5" drive mounting kit. The MB982SPR-2S R1 has equipped with SATA 3 RAID chipset for maximum performance and it is build by full metal construction for best drive stability. The MB982SPR-2S R1’s patented tool-less drive installation design makes drive maintenance easy and cost effective. To add or replace 2.5” drive(s), simply open the top cover of EZConvert and put 2.5" HDD(s) / SSD(s) in the converter and close the top cover and voila! You are ready to go.
The EZConvert Pro MB982SPR-2S R1 is designed to maximize the flexibility of 3.5" drive space with minimum downtime and costs. It is suggested for applications that require OS drive redundancy or high IOPS values such as medical & military systems, government agencies computers, Industrial PCs, SMB workstations, VM workstations, POS systems, SFF & mobile systems, automation systems and embedded systems.
